8.0 KiB

Raw Blame History

HuaweiCloud Python Software Development Kit (Python SDK)

The HuaweiCloud Python SDK allows you to easily work with Huawei Cloud services such as Elastic Compute Service (ECS) and Virtual Private Cloud(VPC) without the need to handle API related tasks.

This document introduces how to obtain and use HuaweiCloud Python SDK.

Getting Started

To use HuaweiCloud Python SDK, you must have Huawei Cloud account as well as the Access Key and Secret key of the HuaweiCloud account.

The accessKey is required when initializing {Service}Client. You can create an AccessKey in the Huawei Cloud console. For more information, see My Credentials.
HuaweiCloud Python SDK requires python 3 or later.

Install Python SDK

HuaweiCloud Python SDK supports Python 3 or later. Run python --version to check the version of Python.

Use python pip

Run the following command to install the individual libraries of HuaweiCloud services:

# Install the core library
pip install huaweicloudsdkcore

# Install the VPC management library
pip install huaweicloudsdkvpc

Install from source

Run the following command to install the individual libraries of HuaweiCloud services:

# Install the core library
cd huaweicloudsdkcore-${version}
python setup.py install

# Install the VPC management library
cd huaweicloudsdkvpc-${version}
python setup.py install

Use Python SDK

Import the required modules as follows:

from huaweicloudsdkcore.auth.credentials import BasicCredentials
from huaweicloudsdkcore.exceptions import exceptions
from huaweicloudsdkcore.http.http_config import HttpConfig
from huaweicloudsdk{service}.v2 import *

Config {Service}Client Configurations

2.1 Use default configuration

#  Use default configuration
config = HttpConfig.get_default_config()

2.2 Proxy(Optional)

# Use Proxy if needed
config.proxy_protocol = 'http'
config.proxy_host = 'proxy.huaweicloud.com'
config.proxy_port = 80
config.proxy_user = 'username'
config.proxy_password = 'password'

2.3 Connection(Optional)

# seconds to wait for the server to send data before giving up, as a float, or (connect timeout, read timeout)
config.timeout = 3

2.4 SSL Certification(Optional)

# Skip ssl certifaction checking while using https protocol if needed
config.ignore_ssl_verification = True
# Server ca certification if needed
config.ssl_ca_cert = ssl_ca_cert

Initialize Credentials
```
credentials = BasicCredentials(ak, sk, project_id, domain_id)
```
where:

For project services, only need to provide project_id, domain_id is optional. For global services, project_id must be null, domain_id should be filled in according to the actual situation. Global services currently only support Iam.
- ak is the access key id for your account.
- sk is the secret access key for your account.
- project_id is the id of the project.
- project_id is the account ID of huawei cloud.

Initialize the {Service}Client instance:

client = {Service}Client.new_builder({Service}Client) \
    .with_http_config(config) \
    .with_credentials(credentials) \
    .with_endpoint(endpoint) \
    .with_file_log(path="test.log", log_level=logging.INFO) \  # Write log files
    .with_stream_log(log_level=logging.INFO) \                 # Write log to console
    .build()

where:

endpoint: service specific endpoints, see Regions and Endpoints.
with_file_log:
- path: log file path.
- log_level: log level, default is INFO.
- max_bytes: size of single log file, default is 10485760 bytes.
- backup_count: count of log file, default is 5.
with_stream_log:
- stream: stream object, default is sys.stdout.
- log_level: log level, default is INFO.

After enabled log, the SDK will print the access log by default, every request will be recorded in console like: '%(asctime)s %(thread)d %(name)s %(filename)s %(lineno)d %(levelname)s %(message)s'

2020-06-16 10:44:02,019 4568 HuaweiCloud-SDK http_handler.py 28 INFO "GET https://vpc.cn-north-1.myhuaweicloud.com/v1/0904f9e1f100d2932f94c01f9aa1cfd7/vpcs" 200 11 0:00:00.543430 b5c927ffdab8401e772e70aa49972037

Send a request and print response.

# Initialize a request and set parameters
response = client.method()
print(respones)

Exceptions

Level 1	Notice	Level 2	Notice
ConnectionException	Connection error	HostUnreachableException	Host is not reachable
		SslHandShakeException	SSL certification error
RequestTimeoutException	Request timeout	CallTimeoutException	timeout for single request
		RetryOutageException	no response after retrying
ServiceResponseException	service response error	ServerResponseException	server inner error, http status code: [500,]
		ClientRequestException	invalid request, http status code: [400? 500)

# handle exceptions
try:
    response = client.method()
except exception.ServiceResponseException as e:
    print(e.status_code)
    print(e.request_id)
    print(e.error_code)
    print(e.error_msg)

Asynchronous Requests

# Initialize asynchronous client
vpc_client = VpcAsyncClient.new_builder(VpcAsyncClient) \
    .with_http_config(config) \
    .with_credentials(credentials) \
    .with_endpoint(endpoint) \
    .build()

# send asynchronous request
response = client.method()

# get asynchronous response
print(response.result())

Troubleshooting

In some situation, you may need to debug your http requests, original http request and response information will be needed. The SDK provides a listener function to obtain the original encrypted http request and response information.

Warning: The original http log can only be used in troubleshooting scenarios, please do not print the original http header or body in the production environment. The log content is not encrypted and may contain sensitive information such as the password of your ECS or the password of your IAM user account, etc. When the response body is binary content, the body will be printed as "***" without detailed information.

def response_handler(**kwargs):
    logger = kwargs.get("logger")
    response = kwargs.get("response")
    request = response.request

    base = "> Request %s %s HTTP/1.1" % (request.method, request.path_url) + "\n"
    if len(request.headers) != 0:
        base = base + "> Headers:" + "\n"
        for each in request.headers:
            base = base + "    %s : %s" % (each, request.headers[each]) + "\n"
    base = base + "> Body: %s" % request.body + "\n\n"

    base = base + "< Response HTTP/1.1 %s " % response.status_code + "\n"
    if len(response.headers) != 0:
        base = base + "< Headers:" + "\n"
        for each in response.headers:
            base = base + "    %s : %s" % (each, response.headers[each],) + "\n"
    base = base + "< Body: %s" % response.content
    logger.debug(base)

client = {Service}Client.new_builder({Service}Client) \
    .with_http_config(config) \
    .with_credentials(credentials) \
    .with_endpoint(endpoint) \
    .with_file_log(path="test.log", log_level=logging.INFO) \
    .with_stream_log(log_level=logging.INFO) \
    .with_http_handler(HttpHandler().add_response_handler(response_handler)) \
    .build()