tornado/tox.ini

# Tox (https://tox.readthedocs.io) is a tool for running tests
# in multiple virtualenvs.  This configuration file will run the tornado
# test suite on all supported python versions.  To use it, "pip install tox"
# and then run "tox" from this directory.
#
# This configuration requires tox 1.8 or higher.
#
# Installation tips:
# When building pycurl on my macports-based setup, I need to either set the
# environment variable ARCHFLAGS='-arch x86_64' or use
# 'port install curl +universal' to get both 32- and 64-bit versions of
# libcurl.
[tox]
envlist =
        # Basic configurations: Run the tests in both minimal installations
        # and with all optional dependencies.
        # (pypy3 doesn't have any optional deps yet)
        {py27,pypy,py34,py35,py36,pypy3},
        {py27,pypy,py34,py35,py36}-full,

        # Also run the tests with each possible replacement of a default
        # component.  Run each test on both python 2 and 3 where possible.
        # (Only one 2.x and one 3.x unless there are known differences).
        # py2 and py3 are aliases for py27-full and py35-full.

        # Alternate HTTP clients.
        {py2,py3}-curl,

        # Alternate IOLoops.
        py2-select,
        py2-full-twisted,
        py2-twistedlayered,

        # Alternate Resolvers.
        {py2,py3}-full-caresresolver,

        # Other configurations; see comments below.
        {py2,py3}-{monotonic,opt},
        py3-{lang_c,lang_utf8},
        py2-locale,
        {py27,py3}-unittest2,

        # Ensure the sphinx build has no errors or warnings
        py3-sphinx-docs,
        # Run the doctests via sphinx (which covers things not run
        # in the regular test suite and vice versa)
        {py2,py3}-sphinx-doctest,

        py3-lint

[testenv]
# Most of these are defaults, but if you specify any you can't fall back
# defaults for the others.
basepython =
           py27: python2.7
           py34: python3.4
           py35: python3.5
           py36: python3.6
           pypy: pypy
           pypy3: pypy3
           py2: python2.7
           py3: python3.6

deps =
     # unittest2 doesn't add anything we need on 2.7+, but we should ensure that
     # its existence doesn't break anything due to conditional imports.
     py27-unittest2: unittest2
     py3-unittest2: unittest2py3k
     # cpython-only deps: pycurl installs but curl_httpclient doesn't work;
     # twisted mostly works but is a bit flaky under pypy.
     {py27,py34,py35,py36}-full: pycurl
     {py2,py3}: pycurl>=7.19.3.1
     # twisted is cpython only.
     {py27,py34,py35,py36}-full: twisted
     {py2,py3}: twisted
     {py2,py3,py27,py34,py35,py36}-full: pycares
     # mock became standard in py33
     {py2,py27,pypy,pypy3}-full: mock
     # singledispatch became standard in py34.
     {py2,py27,pypy}-full: singledispatch
     py2-monotonic: monotonic
     sphinx: sphinx
     sphinx: sphinx_rtd_theme
     lint: flake8

setenv =
       # The extension is mandatory on cpython.
       {py2,py27,py3,py34,py35,py36}: TORNADO_EXTENSION=1
       # In python 3, opening files in text mode uses a
       # system-dependent encoding by default.  Run the tests with "C"
       # (ascii) and "utf-8" locales to ensure we don't have hidden
       # dependencies on this setting.
       lang_c: LANG=C
       lang_utf8: LANG=en_US.utf-8
       # tox's parser chokes if all the setenv entries are conditional.
       DUMMY=dummy
       {py2,py27,py3,py34,py35,py36}-no-ext: TORNADO_EXTENSION=0

# All non-comment lines but the last must end in a backslash.
# Tox filters line-by-line based on the environment name.
commands =
         python \
         # py3*: -b turns on an extra warning when calling
         # str(bytes), and -bb makes it an error.
         {py3,py34,py35,py36,pypy3}: -bb \
         # Python's optimized mode disables the assert statement, so
         # run the tests in this mode to ensure we haven't fallen into
         # the trap of relying on an assertion's side effects or using
         # them for things that should be runtime errors.
         opt: -O \
         -m tornado.test.runtests \
         # Note that httpclient_test is always run with both client
         # implementations; this flag controls which client all the
         # other tests use.
         curl: --httpclient=tornado.curl_httpclient.CurlAsyncHTTPClient \
         poll: --ioloop=tornado.ioloop.PollIOLoop \
         select: --ioloop=tornado.platform.select.SelectIOLoop \
         twisted: --ioloop=tornado.platform.twisted.TwistedIOLoop \
         twistedlayered: --ioloop=tornado.test.twisted_test.LayeredTwistedIOLoop --resolver=tornado.platform.twisted.TwistedResolver \
         caresresolver: --resolver=tornado.platform.caresresolver.CaresResolver \
         threadedresolver: --resolver=tornado.netutil.ThreadedResolver \
         monotonic: --ioloop=tornado.ioloop.PollIOLoop --ioloop_time_monotonic \
         # Test with a non-english locale to uncover str/bytes mixing issues.
         locale: --locale=zh_TW \
         {posargs:}

# python will import relative to the current working directory by default,
# so cd into the tox working directory to avoid picking up the working
# copy of the files (especially important for the speedups module).
changedir = {toxworkdir}

# tox 1.6 passes --pre to pip by default, which currently has problems
# installing pycurl and monotime (https://github.com/pypa/pip/issues/1405).
# Remove it (it's not a part of {opts}) to only install real releases.
install_command = pip install {opts} {packages}

[testenv:py3-sphinx-docs]
changedir = docs
# For some reason the extension fails to load in this configuration,
# but it's not really needed for docs anyway.
setenv = TORNADO_EXTENSION=0
commands =
    sphinx-build -q -E -n -W -b html . {envtmpdir}/html

[testenv:py2-sphinx-doctest]
changedir = docs
setenv = TORNADO_EXTENSION=0
# No -W for doctests because that disallows tests with empty output.
commands =
     sphinx-build -q -E -n -b doctest . {envtmpdir}/doctest

[testenv:py3-sphinx-doctest]
changedir = docs
setenv = TORNADO_EXTENSION=0
commands =
     sphinx-build -q -E -n -b doctest . {envtmpdir}/doctest

[testenv:py3-lint]
commands = flake8 {posargs:}
changedir = {toxinidir}