stash/pkg/plugin/examples/common/graphql.go

235 lines
4.2 KiB
Go
Raw Normal View History

//go:build plugin_example
2020-08-08 02:05:35 +00:00
// +build plugin_example
package common
import (
"context"
"errors"
"fmt"
"github.com/shurcooL/graphql"
"github.com/stashapp/stash/pkg/plugin/common/log"
)
const tagName = "Hawwwwt"
// graphql inputs and returns
type TagCreate struct {
ID graphql.ID `graphql:"id"`
}
type TagCreateInput struct {
Name graphql.String `graphql:"name" json:"name"`
}
type TagDestroyInput struct {
ID graphql.ID `graphql:"id" json:"id"`
}
type FindScenesResultType struct {
Count graphql.Int
2022-03-24 00:03:32 +00:00
DurationSeconds graphql.Float `graphql:"duration" json:"duration"`
FilesizeBytes graphql.Float `graphql:"filesize" json:"filesize"`
Scenes []Scene
2020-08-08 02:05:35 +00:00
}
type Tag struct {
ID graphql.ID `graphql:"id"`
Name graphql.String `graphql:"name"`
}
type Scene struct {
ID graphql.ID
Tags []Tag
}
func (s Scene) getTagIds() []graphql.ID {
ret := []graphql.ID{}
for _, t := range s.Tags {
ret = append(ret, t.ID)
}
return ret
}
type FindFilterType struct {
PerPage *graphql.Int `graphql:"per_page" json:"per_page"`
Sort *graphql.String `graphql:"sort" json:"sort"`
}
type SceneUpdate struct {
ID graphql.ID `graphql:"id"`
}
type SceneUpdateInput struct {
ID graphql.ID `graphql:"id" json:"id"`
TagIds []graphql.ID `graphql:"tag_ids" json:"tag_ids"`
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
func getTagID(ctx context.Context, client *graphql.Client, create bool) (*graphql.ID, error) {
2020-08-08 02:05:35 +00:00
log.Info("Checking if tag exists already")
// see if tag exists already
var q struct {
AllTags []Tag `graphql:"allTags"`
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
err := client.Query(ctx, &q, nil)
2020-08-08 02:05:35 +00:00
if err != nil {
return nil, fmt.Errorf("Error getting tags: %s\n", err.Error())
}
for _, t := range q.AllTags {
if t.Name == tagName {
id := t.ID
return &id, nil
}
}
if !create {
log.Info("Not found and not creating")
return nil, nil
}
// create the tag
var m struct {
TagCreate TagCreate `graphql:"tagCreate(input: $s)"`
}
input := TagCreateInput{
Name: tagName,
}
vars := map[string]interface{}{
"s": input,
}
log.Info("Creating new tag")
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
err = client.Mutate(ctx, &m, vars)
2020-08-08 02:05:35 +00:00
if err != nil {
return nil, fmt.Errorf("Error mutating scene: %s\n", err.Error())
}
return &m.TagCreate.ID, nil
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
func findRandomScene(ctx context.Context, client *graphql.Client) (*Scene, error) {
2020-08-08 02:05:35 +00:00
// get a random scene
var q struct {
FindScenes FindScenesResultType `graphql:"findScenes(filter: $c)"`
}
pp := graphql.Int(1)
sort := graphql.String("random")
filterInput := &FindFilterType{
PerPage: &pp,
Sort: &sort,
}
vars := map[string]interface{}{
"c": filterInput,
}
log.Info("Finding a random scene")
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
err := client.Query(ctx, &q, vars)
2020-08-08 02:05:35 +00:00
if err != nil {
return nil, fmt.Errorf("Error getting random scene: %s\n", err.Error())
}
if q.FindScenes.Count == 0 {
return nil, nil
}
return &q.FindScenes.Scenes[0], nil
}
func addTagId(tagIds []graphql.ID, tagId graphql.ID) []graphql.ID {
for _, t := range tagIds {
if t == tagId {
return tagIds
}
}
tagIds = append(tagIds, tagId)
return tagIds
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
func AddTag(ctx context.Context, client *graphql.Client) error {
tagID, err := getTagID(ctx, client, true)
2020-08-08 02:05:35 +00:00
if err != nil {
return err
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
scene, err := findRandomScene(ctx, client)
2020-08-08 02:05:35 +00:00
if err != nil {
return err
}
if scene == nil {
return errors.New("no scenes to add tag to")
}
var m struct {
SceneUpdate SceneUpdate `graphql:"sceneUpdate(input: $s)"`
}
input := SceneUpdateInput{
ID: scene.ID,
TagIds: scene.getTagIds(),
}
input.TagIds = addTagId(input.TagIds, *tagID)
vars := map[string]interface{}{
"s": input,
}
log.Infof("Adding tag to scene %v", scene.ID)
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
err = client.Mutate(ctx, &m, vars)
2020-08-08 02:05:35 +00:00
if err != nil {
Errorlint sweep + minor linter tweaks (#1796) * Replace error assertions with Go 1.13 style Use `errors.As(..)` over type assertions. This enables better use of wrapped errors in the future, and lets us pass some errorlint checks in the process. The rewrite is entirely mechanical, and uses a standard idiom for doing so. * Use Go 1.13's errors.Is(..) Rather than directly checking for error equality, use errors.Is(..). This protects against error wrapping issues in the future. Even though something like sql.ErrNoRows doesn't need the wrapping, do so anyway, for the sake of consistency throughout the code base. The change almost lets us pass the `errorlint` Go checker except for a missing case in `js.go` which is to be handled separately; it isn't mechanical, like these changes are. * Remove goconst goconst isn't a useful linter in many cases, because it's false positive rate is high. It's 100% for the current code base. * Avoid direct comparison of errors in recover() Assert that we are catching an error from recover(). If we are, check that the error caught matches errStop. * Enable the "errorlint" checker Configure the checker to avoid checking for errorf wraps. These are often false positives since the suggestion is to blanket wrap errors with %w, and that exposes the underlying API which you might not want to do. The other warnings are good however, and with the current patch stack, the code base passes all these checks as well. * Configure rowserrcheck The project uses sqlx. Configure rowserrcheck to include said package. * Mechanically rewrite a large set of errors Mechanically search for errors that look like fmt.Errorf("...%s", err.Error()) and rewrite those into fmt.Errorf("...%v", err) The `fmt` package is error-aware and knows how to call err.Error() itself. The rationale is that this is more idiomatic Go; it paves the way for using error wrapping later with %w in some sites. This patch only addresses the entirely mechanical rewriting caught by a project-side search/replace. There are more individual sites not addressed by this patch.
2021-10-12 03:03:08 +00:00
return fmt.Errorf("Error mutating scene: %v", err)
2020-08-08 02:05:35 +00:00
}
return nil
}
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
func RemoveTag(ctx context.Context, client *graphql.Client) error {
tagID, err := getTagID(ctx, client, false)
2020-08-08 02:05:35 +00:00
if err != nil {
return err
}
if tagID == nil {
log.Info("Tag does not exist. Nothing to remove")
return nil
}
// destroy the tag
var m struct {
TagDestroy bool `graphql:"tagDestroy(input: $s)"`
}
input := TagDestroyInput{
ID: *tagID,
}
vars := map[string]interface{}{
"s": input,
}
log.Info("Destroying tag")
Toward better context handling (#1835) * Use the request context The code uses context.Background() in a flow where there is a http.Request. Use the requests context instead. * Use a true context in the plugin example Let AddTag/RemoveTag take a context and use that context throughout the example. * Avoid the use of context.Background Prefer context.TODO over context.Background deep in the call chain. This marks the site as something which we need to context-handle later, and also makes it clear to the reader that the context is sort-of temporary in the code base. While here, be consistent in handling the `act` variable in each branch of the if .. { .. } .. check. * Prefer context.TODO over context.Background For the different scraping operations here, there is a context higher up the call chain, which we ought to use. Mark the call-sites as TODO for now, so we can come back later on a sweep of which parts can be context-lifted. * Thread context upwards Initialization requires context for transactions. Thread the context upward the call chain. At the intialization call, add a context.TODO since we can't break this yet. The singleton assumption prevents us from pulling it up into main for now. * make tasks context-aware Change the task interface to understand contexts. Pass the context down in some of the branches where it is needed. * Make QueryStashBoxScene context-aware This call naturally sits inside the request-context. Use it. * Introduce a context in the JS plugin code This allows us to use a context for HTTP calls inside the system. Mark the context with a TODO at top level for now. * Nitpick error formatting Use %v rather than %s for error interfaces. Do not begin an error strong with a capital letter. * Avoid the use of http.Get in FFMPEG download chain Since http.Get has no context, it isn't possible to break out or have policy induced. The call will block until the GET completes. Rewrite to use a http Request and provide a context. Thread the context through the call chain for now. provide context.TODO() at the top level of the initialization chain. * Make getRemoteCDPWSAddress aware of contexts Eliminate a call to http.Get and replace it with a context-aware variant. Push the context upwards in the call chain, but plug it before the scraper interface so we don't have to rewrite said interface yet. Plugged with context.TODO() * Scraper: make the getImage function context-aware Use a context, and pass it upwards. Plug it with context.TODO() up the chain before the rewrite gets too much out of hand for now. Minor tweaks along the way, remove a call to context.Background() deep in the call chain. * Make NOTIFY request context-aware The call sits inside a Request-handler. So it's natural to use the requests context as the context for the outgoing HTTP request. * Use a context in the url scraper code We are sitting in code which has a context, so utilize it for the request as well. * Use a context when checking versions When we check the version of stash on Github, use a context. Thread the context up to the initialization routine of the HTTP/GraphQL server and plug it with a context.TODO() for now. This paves the way for providing a context to the HTTP server code in a future patch. * Make utils func ReadImage context-aware In almost all of the cases, there is a context in the call chain which is a natural use. This is true for all the GraphQL mutations. The exception is in task_stash_box_tag, so plug that task with context.TODO() for now. * Make stash-box get context-aware Thread a context through the call chain until we hit the Client API. Plug it with context.TODO() there for now. * Enable the noctx linter The code is now free of any uncontexted HTTP request. This means we pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
err = client.Mutate(ctx, &m, vars)
2020-08-08 02:05:35 +00:00
if err != nil {
Errorlint sweep + minor linter tweaks (#1796) * Replace error assertions with Go 1.13 style Use `errors.As(..)` over type assertions. This enables better use of wrapped errors in the future, and lets us pass some errorlint checks in the process. The rewrite is entirely mechanical, and uses a standard idiom for doing so. * Use Go 1.13's errors.Is(..) Rather than directly checking for error equality, use errors.Is(..). This protects against error wrapping issues in the future. Even though something like sql.ErrNoRows doesn't need the wrapping, do so anyway, for the sake of consistency throughout the code base. The change almost lets us pass the `errorlint` Go checker except for a missing case in `js.go` which is to be handled separately; it isn't mechanical, like these changes are. * Remove goconst goconst isn't a useful linter in many cases, because it's false positive rate is high. It's 100% for the current code base. * Avoid direct comparison of errors in recover() Assert that we are catching an error from recover(). If we are, check that the error caught matches errStop. * Enable the "errorlint" checker Configure the checker to avoid checking for errorf wraps. These are often false positives since the suggestion is to blanket wrap errors with %w, and that exposes the underlying API which you might not want to do. The other warnings are good however, and with the current patch stack, the code base passes all these checks as well. * Configure rowserrcheck The project uses sqlx. Configure rowserrcheck to include said package. * Mechanically rewrite a large set of errors Mechanically search for errors that look like fmt.Errorf("...%s", err.Error()) and rewrite those into fmt.Errorf("...%v", err) The `fmt` package is error-aware and knows how to call err.Error() itself. The rationale is that this is more idiomatic Go; it paves the way for using error wrapping later with %w in some sites. This patch only addresses the entirely mechanical rewriting caught by a project-side search/replace. There are more individual sites not addressed by this patch.
2021-10-12 03:03:08 +00:00
return fmt.Errorf("Error destroying tag: %v", err)
2020-08-08 02:05:35 +00:00
}
return nil
}