2020-01-04 16:39:33 +00:00
|
|
|
package scraper
|
|
|
|
|
|
|
|
import (
|
2020-03-20 21:55:15 +00:00
|
|
|
"bytes"
|
Toward better context handling (#1835)
* Use the request context
The code uses context.Background() in a flow where there is a
http.Request. Use the requests context instead.
* Use a true context in the plugin example
Let AddTag/RemoveTag take a context and use that context throughout
the example.
* Avoid the use of context.Background
Prefer context.TODO over context.Background deep in the call chain.
This marks the site as something which we need to context-handle
later, and also makes it clear to the reader that the context is
sort-of temporary in the code base.
While here, be consistent in handling the `act` variable in each
branch of the if .. { .. } .. check.
* Prefer context.TODO over context.Background
For the different scraping operations here, there is a context
higher up the call chain, which we ought to use. Mark the call-sites
as TODO for now, so we can come back later on a sweep of which parts
can be context-lifted.
* Thread context upwards
Initialization requires context for transactions. Thread the context
upward the call chain.
At the intialization call, add a context.TODO since we can't break this
yet. The singleton assumption prevents us from pulling it up into main for
now.
* make tasks context-aware
Change the task interface to understand contexts.
Pass the context down in some of the branches where it is needed.
* Make QueryStashBoxScene context-aware
This call naturally sits inside the request-context. Use it.
* Introduce a context in the JS plugin code
This allows us to use a context for HTTP calls inside the system.
Mark the context with a TODO at top level for now.
* Nitpick error formatting
Use %v rather than %s for error interfaces.
Do not begin an error strong with a capital letter.
* Avoid the use of http.Get in FFMPEG download chain
Since http.Get has no context, it isn't possible to break out or have
policy induced. The call will block until the GET completes. Rewrite
to use a http Request and provide a context.
Thread the context through the call chain for now. provide
context.TODO() at the top level of the initialization chain.
* Make getRemoteCDPWSAddress aware of contexts
Eliminate a call to http.Get and replace it with a context-aware
variant.
Push the context upwards in the call chain, but plug it before the
scraper interface so we don't have to rewrite said interface yet.
Plugged with context.TODO()
* Scraper: make the getImage function context-aware
Use a context, and pass it upwards. Plug it with context.TODO()
up the chain before the rewrite gets too much out of hand for now.
Minor tweaks along the way, remove a call to context.Background()
deep in the call chain.
* Make NOTIFY request context-aware
The call sits inside a Request-handler. So it's natural to use the
requests context as the context for the outgoing HTTP request.
* Use a context in the url scraper code
We are sitting in code which has a context, so utilize it for the
request as well.
* Use a context when checking versions
When we check the version of stash on Github, use a context. Thread
the context up to the initialization routine of the HTTP/GraphQL
server and plug it with a context.TODO() for now.
This paves the way for providing a context to the HTTP server code in a
future patch.
* Make utils func ReadImage context-aware
In almost all of the cases, there is a context in the call chain which
is a natural use. This is true for all the GraphQL mutations.
The exception is in task_stash_box_tag, so plug that task with
context.TODO() for now.
* Make stash-box get context-aware
Thread a context through the call chain until we hit the Client API.
Plug it with context.TODO() there for now.
* Enable the noctx linter
The code is now free of any uncontexted HTTP request. This means we
pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
|
|
|
"context"
|
2020-01-04 16:39:33 +00:00
|
|
|
"errors"
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
"fmt"
|
Cache and reuse the scraper HTTP client (#1855)
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes #1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
2021-10-20 05:12:24 +00:00
|
|
|
"net/http"
|
2020-01-31 22:17:40 +00:00
|
|
|
"net/url"
|
2020-01-04 16:39:33 +00:00
|
|
|
"regexp"
|
|
|
|
"strings"
|
|
|
|
|
|
|
|
"github.com/antchfx/htmlquery"
|
2020-08-04 00:42:40 +00:00
|
|
|
|
2020-01-04 16:39:33 +00:00
|
|
|
"golang.org/x/net/html"
|
|
|
|
|
|
|
|
"github.com/stashapp/stash/pkg/logger"
|
|
|
|
"github.com/stashapp/stash/pkg/models"
|
|
|
|
)
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
type xpathScraper struct {
|
|
|
|
scraper scraperTypeConfig
|
|
|
|
config config
|
|
|
|
globalConfig GlobalConfig
|
Cache and reuse the scraper HTTP client (#1855)
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes #1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
2021-10-20 05:12:24 +00:00
|
|
|
client *http.Client
|
2021-01-18 01:23:20 +00:00
|
|
|
txnManager models.TransactionManager
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
Cache and reuse the scraper HTTP client (#1855)
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes #1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
2021-10-20 05:12:24 +00:00
|
|
|
func newXpathScraper(scraper scraperTypeConfig, client *http.Client, txnManager models.TransactionManager, config config, globalConfig GlobalConfig) *xpathScraper {
|
2020-07-21 04:06:25 +00:00
|
|
|
return &xpathScraper{
|
|
|
|
scraper: scraper,
|
|
|
|
config: config,
|
|
|
|
globalConfig: globalConfig,
|
Cache and reuse the scraper HTTP client (#1855)
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes #1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
2021-10-20 05:12:24 +00:00
|
|
|
client: client,
|
2021-01-18 01:23:20 +00:00
|
|
|
txnManager: txnManager,
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
func (s *xpathScraper) getXpathScraper() *mappedScraper {
|
|
|
|
return s.config.XPathScrapers[s.scraper.Scraper]
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
func (s *xpathScraper) scrapeURL(ctx context.Context, url string) (*html.Node, *mappedScraper, error) {
|
2020-07-21 04:06:25 +00:00
|
|
|
scraper := s.getXpathScraper()
|
2020-06-18 00:47:10 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
if scraper == nil {
|
|
|
|
return nil, nil, errors.New("xpath scraper with name " + s.scraper.Scraper + " not found in config")
|
2020-03-11 00:41:55 +00:00
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, err := s.loadURL(ctx, url)
|
2020-01-31 22:17:40 +00:00
|
|
|
|
|
|
|
if err != nil {
|
2020-07-21 04:06:25 +00:00
|
|
|
return nil, nil, err
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
return doc, scraper, nil
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
func (s *xpathScraper) scrapeByURL(ctx context.Context, url string, ty models.ScrapeContentType) (models.ScrapedContent, error) {
|
2021-03-01 22:19:56 +00:00
|
|
|
u := replaceURL(url, s.scraper) // allow a URL Replace for performer by URL queries
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, scraper, err := s.scrapeURL(ctx, u)
|
2020-03-11 00:41:55 +00:00
|
|
|
if err != nil {
|
2020-07-21 04:06:25 +00:00
|
|
|
return nil, err
|
2020-03-11 00:41:55 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
q := s.getXPathQuery(doc)
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
switch ty {
|
|
|
|
case models.ScrapeContentTypePerformer:
|
|
|
|
return scraper.scrapePerformer(ctx, q)
|
|
|
|
case models.ScrapeContentTypeScene:
|
|
|
|
return scraper.scrapeScene(ctx, q)
|
|
|
|
case models.ScrapeContentTypeGallery:
|
|
|
|
return scraper.scrapeGallery(ctx, q)
|
|
|
|
case models.ScrapeContentTypeMovie:
|
|
|
|
return scraper.scrapeMovie(ctx, q)
|
2020-10-20 22:24:32 +00:00
|
|
|
}
|
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return nil, ErrNotSupported
|
2020-10-20 22:24:32 +00:00
|
|
|
}
|
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
func (s *xpathScraper) scrapeByName(ctx context.Context, name string, ty models.ScrapeContentType) ([]models.ScrapedContent, error) {
|
2020-07-21 04:06:25 +00:00
|
|
|
scraper := s.getXpathScraper()
|
2020-01-04 16:39:33 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
if scraper == nil {
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return nil, fmt.Errorf("%w: name %v", ErrNotFound, s.scraper.Scraper)
|
2020-01-04 16:39:33 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
const placeholder = "{}"
|
2020-01-04 16:39:33 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
// replace the placeholder string with the URL-escaped name
|
|
|
|
escapedName := url.QueryEscape(name)
|
2020-03-10 03:28:15 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
url := s.scraper.QueryURL
|
Enable gocritic (#1848)
* Don't capitalize local variables
ValidCodecs -> validCodecs
* Capitalize deprecation markers
A deprecated marker should be capitalized.
* Use re.MustCompile for static regexes
If the regex fails to compile, it's a programmer error, and should be
treated as such. The regex is entirely static.
* Simplify else-if constructions
Rewrite
else { if cond {}}
to
else if cond {}
* Use a switch statement to analyze formats
Break an if-else chain. While here, simplify code flow.
Also introduce a proper static error for unsupported image formats,
paving the way for being able to check against the error.
* Rewrite ifElse chains into switch statements
The "Effective Go" https://golang.org/doc/effective_go#switch document
mentions it is more idiomatic to write if-else chains as switches when
it is possible.
Find all the plain rewrite occurrences in the code base and rewrite.
In some cases, the if-else chains are replaced by a switch scrutinizer.
That is, the code sequence
if x == 1 {
..
} else if x == 2 {
..
} else if x == 3 {
...
}
can be rewritten into
switch x {
case 1:
..
case 2:
..
case 3:
..
}
which is clearer for the compiler: it can decide if the switch is
better served by a jump-table then a branch-chain.
* Rewrite switches, introduce static errors
Introduce two new static errors:
* `ErrNotImplmented`
* `ErrNotSupported`
And use these rather than forming new generative errors whenever the
code is called. Code can now test on the errors (since they are static
and the pointers to them wont change).
Also rewrite ifElse chains into switches in this part of the code base.
* Introduce a StashBoxError in configuration
Since all stashbox errors are the same, treat them as such in the code
base. While here, rewrite an ifElse chain.
In the future, it might be beneifical to refactor configuration errors
into one error which can handle missing fields, which context the error
occurs in and so on. But for now, try to get an overview of the error
categories by hoisting them into static errors.
* Get rid of an else-block in transaction handling
If we succesfully `recover()`, we then always `panic()`. This means the
rest of the code is not reachable, so we can avoid having an else-block
here.
It also solves an ifElse-chain style check in the code base.
* Use strings.ReplaceAll
Rewrite
strings.Replace(s, o, n, -1)
into
strings.ReplaceAll(s, o, n)
To make it consistent and clear that we are doing an all-replace in the
string rather than replacing parts of it. It's more of a nitpick since
there are no implementation differences: the stdlib implementation is
just to supply -1.
* Rewrite via gocritic's assignOp
Statements of the form
x = x + e
is rewritten into
x += e
where applicable.
* Formatting
* Review comments handled
Stash-box is a proper noun.
Rewrite a switch into an if-chain which returns on the first error
encountered.
* Use context.TODO() over context.Background()
Patch in the same vein as everything else: use the TODO() marker so we
can search for it later and link it into the context tree/tentacle once
it reaches down to this level in the code base.
* Tell the linter to ignore a section in manager_tasks.go
The section is less readable, so mark it with a nolint for now. Because
the rewrite enables a ifElseChain, also mark that as nolint for now.
* Use strings.ReplaceAll over strings.Replace
* Apply an ifElse rewrite
else { if .. { .. } } rewrite into else if { .. }
* Use switch-statements over ifElseChains
Rewrite chains of if-else into switch statements. Where applicable,
add an early nil-guard to simplify case analysis. Also, in
ScanTask's Start(..), invert the logic to outdent the whole block, and
help the reader: if it's not a scene, the function flow is now far more
local to the top of the function, and it's clear that the rest of the
function has to do with scene management.
* Enable gocritic on the code base.
Disable appendAssign for now since we aren't passing that check yet.
* Document the nolint additions
* Document StashBoxBatchPerformerTagInput
2021-10-18 03:12:40 +00:00
|
|
|
url = strings.ReplaceAll(url, placeholder, escapedName)
|
2020-03-10 03:28:15 +00:00
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, err := s.loadURL(ctx, url)
|
2020-03-10 03:28:15 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
2020-01-04 16:39:33 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
q := s.getXPathQuery(doc)
|
2020-01-04 16:39:33 +00:00
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
var content []models.ScrapedContent
|
|
|
|
switch ty {
|
|
|
|
case models.ScrapeContentTypePerformer:
|
|
|
|
performers, err := scraper.scrapePerformers(ctx, q)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
for _, p := range performers {
|
|
|
|
content = append(content, p)
|
|
|
|
}
|
2021-09-14 04:54:53 +00:00
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return content, nil
|
|
|
|
case models.ScrapeContentTypeScene:
|
|
|
|
scenes, err := scraper.scrapeScenes(ctx, q)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
for _, s := range scenes {
|
|
|
|
content = append(content, s)
|
|
|
|
}
|
2021-09-14 04:54:53 +00:00
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return content, nil
|
2021-09-14 04:54:53 +00:00
|
|
|
}
|
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return nil, ErrNotSupported
|
2021-09-14 04:54:53 +00:00
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
func (s *xpathScraper) scrapeSceneByScene(ctx context.Context, scene *models.Scene) (*models.ScrapedScene, error) {
|
2020-08-10 04:21:50 +00:00
|
|
|
// construct the URL
|
2021-09-07 01:54:22 +00:00
|
|
|
queryURL := queryURLParametersFromScene(scene)
|
2020-10-22 00:56:04 +00:00
|
|
|
if s.scraper.QueryURLReplacements != nil {
|
|
|
|
queryURL.applyReplacements(s.scraper.QueryURLReplacements)
|
|
|
|
}
|
|
|
|
url := queryURL.constructURL(s.scraper.QueryURL)
|
2020-08-10 04:21:50 +00:00
|
|
|
|
|
|
|
scraper := s.getXpathScraper()
|
|
|
|
|
|
|
|
if scraper == nil {
|
|
|
|
return nil, errors.New("xpath scraper with name " + s.scraper.Scraper + " not found in config")
|
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, err := s.loadURL(ctx, url)
|
2020-08-10 04:21:50 +00:00
|
|
|
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
q := s.getXPathQuery(doc)
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return scraper.scrapeScene(ctx, q)
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
func (s *xpathScraper) scrapeByFragment(ctx context.Context, input Input) (models.ScrapedContent, error) {
|
|
|
|
switch {
|
|
|
|
case input.Gallery != nil:
|
|
|
|
return nil, fmt.Errorf("%w: cannot use an xpath scraper as a gallery fragment scraper", ErrNotSupported)
|
|
|
|
case input.Performer != nil:
|
|
|
|
return nil, fmt.Errorf("%w: cannot use an xpath scraper as a performer fragment scraper", ErrNotSupported)
|
|
|
|
case input.Scene == nil:
|
|
|
|
return nil, fmt.Errorf("%w: scene input is nil", ErrNotSupported)
|
|
|
|
}
|
|
|
|
|
|
|
|
scene := *input.Scene
|
|
|
|
|
2021-09-14 04:54:53 +00:00
|
|
|
// construct the URL
|
|
|
|
queryURL := queryURLParametersFromScrapedScene(scene)
|
|
|
|
if s.scraper.QueryURLReplacements != nil {
|
|
|
|
queryURL.applyReplacements(s.scraper.QueryURLReplacements)
|
|
|
|
}
|
|
|
|
url := queryURL.constructURL(s.scraper.QueryURL)
|
|
|
|
|
|
|
|
scraper := s.getXpathScraper()
|
|
|
|
|
|
|
|
if scraper == nil {
|
|
|
|
return nil, errors.New("xpath scraper with name " + s.scraper.Scraper + " not found in config")
|
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, err := s.loadURL(ctx, url)
|
2021-09-14 04:54:53 +00:00
|
|
|
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
q := s.getXPathQuery(doc)
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return scraper.scrapeScene(ctx, q)
|
2021-09-07 01:54:22 +00:00
|
|
|
}
|
2020-10-20 22:24:32 +00:00
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
func (s *xpathScraper) scrapeGalleryByGallery(ctx context.Context, gallery *models.Gallery) (*models.ScrapedGallery, error) {
|
2020-10-20 22:24:32 +00:00
|
|
|
// construct the URL
|
2021-09-07 01:54:22 +00:00
|
|
|
queryURL := queryURLParametersFromGallery(gallery)
|
2020-10-22 00:56:04 +00:00
|
|
|
if s.scraper.QueryURLReplacements != nil {
|
|
|
|
queryURL.applyReplacements(s.scraper.QueryURLReplacements)
|
|
|
|
}
|
|
|
|
url := queryURL.constructURL(s.scraper.QueryURL)
|
2020-10-20 22:24:32 +00:00
|
|
|
|
|
|
|
scraper := s.getXpathScraper()
|
|
|
|
|
|
|
|
if scraper == nil {
|
|
|
|
return nil, errors.New("xpath scraper with name " + s.scraper.Scraper + " not found in config")
|
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
doc, err := s.loadURL(ctx, url)
|
2020-10-20 22:24:32 +00:00
|
|
|
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
q := s.getXPathQuery(doc)
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
return scraper.scrapeGallery(ctx, q)
|
2021-09-07 01:54:22 +00:00
|
|
|
}
|
|
|
|
|
Toward better context handling (#1835)
* Use the request context
The code uses context.Background() in a flow where there is a
http.Request. Use the requests context instead.
* Use a true context in the plugin example
Let AddTag/RemoveTag take a context and use that context throughout
the example.
* Avoid the use of context.Background
Prefer context.TODO over context.Background deep in the call chain.
This marks the site as something which we need to context-handle
later, and also makes it clear to the reader that the context is
sort-of temporary in the code base.
While here, be consistent in handling the `act` variable in each
branch of the if .. { .. } .. check.
* Prefer context.TODO over context.Background
For the different scraping operations here, there is a context
higher up the call chain, which we ought to use. Mark the call-sites
as TODO for now, so we can come back later on a sweep of which parts
can be context-lifted.
* Thread context upwards
Initialization requires context for transactions. Thread the context
upward the call chain.
At the intialization call, add a context.TODO since we can't break this
yet. The singleton assumption prevents us from pulling it up into main for
now.
* make tasks context-aware
Change the task interface to understand contexts.
Pass the context down in some of the branches where it is needed.
* Make QueryStashBoxScene context-aware
This call naturally sits inside the request-context. Use it.
* Introduce a context in the JS plugin code
This allows us to use a context for HTTP calls inside the system.
Mark the context with a TODO at top level for now.
* Nitpick error formatting
Use %v rather than %s for error interfaces.
Do not begin an error strong with a capital letter.
* Avoid the use of http.Get in FFMPEG download chain
Since http.Get has no context, it isn't possible to break out or have
policy induced. The call will block until the GET completes. Rewrite
to use a http Request and provide a context.
Thread the context through the call chain for now. provide
context.TODO() at the top level of the initialization chain.
* Make getRemoteCDPWSAddress aware of contexts
Eliminate a call to http.Get and replace it with a context-aware
variant.
Push the context upwards in the call chain, but plug it before the
scraper interface so we don't have to rewrite said interface yet.
Plugged with context.TODO()
* Scraper: make the getImage function context-aware
Use a context, and pass it upwards. Plug it with context.TODO()
up the chain before the rewrite gets too much out of hand for now.
Minor tweaks along the way, remove a call to context.Background()
deep in the call chain.
* Make NOTIFY request context-aware
The call sits inside a Request-handler. So it's natural to use the
requests context as the context for the outgoing HTTP request.
* Use a context in the url scraper code
We are sitting in code which has a context, so utilize it for the
request as well.
* Use a context when checking versions
When we check the version of stash on Github, use a context. Thread
the context up to the initialization routine of the HTTP/GraphQL
server and plug it with a context.TODO() for now.
This paves the way for providing a context to the HTTP server code in a
future patch.
* Make utils func ReadImage context-aware
In almost all of the cases, there is a context in the call chain which
is a natural use. This is true for all the GraphQL mutations.
The exception is in task_stash_box_tag, so plug that task with
context.TODO() for now.
* Make stash-box get context-aware
Thread a context through the call chain until we hit the Client API.
Plug it with context.TODO() there for now.
* Enable the noctx linter
The code is now free of any uncontexted HTTP request. This means we
pass the noctx linter, and we can enable it in the code base.
2021-10-14 04:32:41 +00:00
|
|
|
func (s *xpathScraper) loadURL(ctx context.Context, url string) (*html.Node, error) {
|
Cache and reuse the scraper HTTP client (#1855)
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes #1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
2021-10-20 05:12:24 +00:00
|
|
|
r, err := loadURL(ctx, url, s.client, s.config, s.globalConfig)
|
2020-03-20 21:55:15 +00:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
ret, err := html.Parse(r)
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
if err == nil && s.config.DebugOptions != nil && s.config.DebugOptions.PrintHTML {
|
2020-03-20 21:55:15 +00:00
|
|
|
var b bytes.Buffer
|
2021-09-23 07:15:50 +00:00
|
|
|
if err := html.Render(&b, ret); err != nil {
|
|
|
|
logger.Warnf("could not render HTML: %v", err)
|
|
|
|
}
|
2020-03-20 21:55:15 +00:00
|
|
|
logger.Infof("loadURL (%s) response: \n%s", url, b.String())
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret, err
|
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
func (s *xpathScraper) getXPathQuery(doc *html.Node) *xpathQuery {
|
|
|
|
return &xpathQuery{
|
|
|
|
doc: doc,
|
|
|
|
scraper: s,
|
2020-01-04 16:39:33 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
type xpathQuery struct {
|
|
|
|
doc *html.Node
|
|
|
|
scraper *xpathScraper
|
|
|
|
}
|
2020-01-04 16:39:33 +00:00
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
func (q *xpathQuery) runQuery(selector string) ([]string, error) {
|
2020-07-21 04:06:25 +00:00
|
|
|
found, err := htmlquery.QueryAll(q.doc, selector)
|
|
|
|
if err != nil {
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
return nil, fmt.Errorf("selector '%s': parse error: %v", selector, err)
|
2020-07-09 22:42:06 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
var ret []string
|
|
|
|
for _, n := range found {
|
|
|
|
// don't add empty strings
|
|
|
|
nodeText := q.nodeText(n)
|
|
|
|
if nodeText != "" {
|
|
|
|
ret = append(ret, q.nodeText(n))
|
|
|
|
}
|
2020-01-04 16:39:33 +00:00
|
|
|
}
|
|
|
|
|
Refactor scraper top half (#1893)
* Simplify scraper listing
Introduce an enum, scraper.Kind, which explains what we are looking
for. Make it possible to match this from a scraper struct.
Use the enum to rewrite all the listing code to use the same code path.
* Use a map, nitpick ScrapePerformerList
Let the cache store a map from ID of a scraper to the scraper. This
improves lookups when there are many scrapers, making it practically
O(1) rather than O(n). If many scrapers are stored, this is faster.
Since range expressions work unchanged, we don't have to change much,
and things will still work.
make Kind a Stringer
Rename ScraperPerformerList -> ScraperPerformerQuery since that name
is used in the other scrapers, and we value consistency.
Tune ScraperPerformerQuery:
* Return static errors
* Use the new functionality
* When loading scrapers, do so directly
Rather than first walking the directory structure to obtain file paths,
fold the load directly in the the filepath walk. This makes the code
for more direct.
* Use static ErrNotFound
If a scraper isn't found, return one static error. This paves the way
for eventually doing our own error-presenter in gqlgen.
* Store the cache in the Resolver state
Putting the scraperCache directly in the resolver avoids the need to
call manager.GetInstance() all over the place to get access to the
scraper cache. The cache is stored by pointer, so it should be safe,
since the cache will just update its internal state rather than being
overwritten.
We can now utilize the resolver state to grab the cache where needed.
While here, pass context.Context from the resolver down into a function,
which removes a context.TODO()
* Introduce ScrapedContent
Create a union in the GraphQL schema for all scraped content. This
simplifies the internal implementation because we get variance on
the output content type.
Introduce a new type ScrapedContentType which signifies the scraped
content you want as a caller.
Use these to generalize the List interface and the URL scraping
interface.
* Simplify the scraper API
Introduce a new interface for scraping. This interface is then
used in the upper half of the scraper code, to make the code use one
code flow rather than multiple code flows. Variance is currently at
the old scraper structure.
Add extending interfaces for the different ways of invoking scrapes.
Use interface conversions to convert a scraper from the cache to a
scraper supporting the extra methods.
The return path returns models.ScrapedContent.
Write a general postProcess function in the scraper, handling all
ScrapedContent via type switching. This consolidates all postprocessing
code flows.
Introduce marhsallers in the resolver code for converting ScrapedContent
into the underlying concrete types. Use this to plug the existing
fields in the Query resolver, so everything still works.
* ScrapedContent: add more marshalling functions
Handle all marshalling of ScrapedContent through marhsalling functions.
Removes some hand-rolled early variants of it, and replaces it with
a canonical code flow.
* Support loadByName via scraper_s
In order to temporarily plug a hole in the current implementation, we
use the older implementation as a hook to get the newer implementation
to run.
Later on, this can serve as a guide for how to implement the lower level
bits inside the scrapers themselves. For now, it just enables support.
* Plug the remaining scraper functions for now
Since we would like to have a scraper which works in between refactors,
plug the lower level parts of the scraper for now. It avoids us having
to tackle this part just yet.
* Move postprocessing to its own file
There's enough postprocessing to clutter the main scrapers.go file.
Move all of this into a new file, postprocessing to make the API
simpler. It now lives in scrapers.go.
* Scraper: Invoke API consistency
scraper.Cache.ScrapeByName -> ScrapeName
* Fix scraping scenes by URL
Simple typo. While here, also make a single marshaller nil-aware.
* Introduce scraper groups, consolidate loadByURL
Rename `scraper_s` into `group`. A group is a group of scrapers with
the same identity. This corresponds to a single YAML file for a scraper
configuration. It defines a group which supports different types of
scraping contexts.
Move config into the group, and lift txnManager and globalConfig to
the group.
Because we now return models.ScrapedContent we can use interfaces to
get variance from the different underlying scrapers. Use a type
switch for the URL matcher candidates. And then again for the scrapers.
This consolidates all URL scraping paths into one.
While here, remove the urlMatcher interface which isn't needed. Also
clean up the remaining interfaces for url scraping and delete code
which has no purpose anymore.
* Consolidate fragment scraping in one code path
While here, abide the linters checks.
* Refactor loadByFragment
Give it the same treatment as loadByURL:
Step 1: find a scraperActionImpl which works for the data.
Step 2: use that to scrape
Most of this is simple analysis on the data at hand. It can be pushed
down further in a later commit, but for now we leave it here.
* Remove configScraper, autotag is a scraper
Remove the remains of the configScraper struct. It now lives on in the
group struct. Kill the remaining interfaces from the old implementation
while here.
Remove group.specification since it can now be handled by a simple
func call to spec().
Work through the autotag scraper. It now implements the scraper
interface, so it can be used as a scraper. This also simplifies the
autotag scraper quite a bit since it doens't have to implement a number
of unsupported func calls.
* Simplify the fragment scraper flow
* Pass the context
Eliminate a round of context.TODO() in the scraper code by passing
the calling context down into the subsystem. This will gracefully
allow for termination of remote calls if the client goes away for some
reason in GraphQL requests.
* Improve listScrapers in the schema
Support lists of types we accept.
* Be graceful on nil values in conversion
Supporting nil-values make the API more robust in the
case of partial results in a multi-scrape situation.
* Improve listScrapers: output at-most-once
Use the ID of a scraper to reduce the output set. If a scraper has
been included, don't include it again.
* Consolidate all API level errors into resolver.go
* Reorder files and functions:
scrapers.go -> cache.go:
It almost contains nothing but the cache code.
Move errors into scraper.go from here because
It is a better place to have them living right now
group.go:
All of the group structure. This can now go from
scraper.go, making it more lean. Move group create
from config_scraper to here.
config.go:
Move the `(c config) spec()` call to here.
config_scraper.go:
Empty file by now
* Name-update the scraper interfaces
Use 'via' rather than 'loadBy'.
The scrape happens via a given scrape method, so I think this is a nice
name for it.
* Rename scrapers for consistency.
While here, improve the error formatting, so different errors come
back differently.
* Nuke the freeones field from the GraphQL schema
* Fix autotag interfacing, refactor
The autotag scraper uses a pointer receiver, but the rest of the code
we use for scraping doesn't expect a pointer-receiver. Hence, to fix
the autotag scraper, we change it to be a value receiver, like the
rest of the code.
Fix: viaScene, and viaGallery.
While here, remove a couple of pointer-receiver methods which can be
trivially rewritten into plain functions.
* Protect against pointer interfaces
The underlying code can be a bit inconsistent in what it returns.
Introduce pointer-types in the postprocessing layer and handle them
accordingly for now. Once a better understanding of the lower levels
are understood, we can lift this.
* Move ErrConversion into the models package.
The conversion error pertains to the logic of converting models.
Because of this, it should move there, so it is centralized.
* Be consistent in scraper resolver error handling
If we have a static error
Err = errors.New(..)
Then use it wrapped at the start:
fmt.Errorf("%w: ...context...", Err)
This reads better.
While here, avoid using the underlying Atoi errors: they are verbose,
and like 99% of the time, the user know what is wrong from the input
string, so just give that back.
Also, remove the scraper id from the error contexts: it is implicit,
and the error wouldn't change if we used a different scraper, which
the error message would imply.
* Mark the list*Scrapers() API as deprecated
The same functionality is now present in listScrapers.
* Improve error formatting
Think about how each error is going to be used and tweak them to be
nicer.
* Return a sorted list of scrapers
This helps testing, it's closer to what we had, caches like stable data,
and it is easier for humans. It also makes the output stable, because
map iteration is randomized.
* Fix listScrapers calls to return in ID-order
Since we need the ordering to be by ID in all situations, it is easier
to just generalize the cache listScrapers call to support multiple
scraper types.
This avoids a de-dupe map up the chain, since every scraper is only
considered once. Sorting now happens in the cache listScrapers call.
Use this generalized function in all resolvers, which are now simple
passthroughs.
* Remove UpdateConfig from the scraper cache.
This isn't needed, so get rid of it.
* Pull a context into identify
Scraping scenes in the identify tasks now use a context from up the
call chain.
* Do not store the scraper cache in the resolver.
Scraper caches are updated through
manager.singleton•RefreshScraperCache, so we can't keep a pointer to
it in the resolver. Instead, solve this by adding a fetcher method to
the resolver type. This keeps it local to the resolver, while handling
the problem of updating caches in the configuration.
2021-11-18 23:55:34 +00:00
|
|
|
return ret, nil
|
2020-01-04 16:39:33 +00:00
|
|
|
}
|
2020-01-31 22:17:40 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
func (q *xpathQuery) nodeText(n *html.Node) string {
|
|
|
|
var ret string
|
|
|
|
if n != nil && n.Type == html.CommentNode {
|
|
|
|
ret = htmlquery.OutputHTML(n, true)
|
2020-08-23 07:39:15 +00:00
|
|
|
} else {
|
|
|
|
ret = htmlquery.InnerText(n)
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
// trim all leading and trailing whitespace
|
|
|
|
ret = strings.TrimSpace(ret)
|
2020-01-31 22:17:40 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
// remove multiple whitespace
|
|
|
|
re := regexp.MustCompile(" +")
|
|
|
|
ret = re.ReplaceAllString(ret, " ")
|
2020-01-31 22:17:40 +00:00
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
// TODO - make this optional
|
|
|
|
re = regexp.MustCompile("\n")
|
|
|
|
ret = re.ReplaceAllString(ret, "")
|
|
|
|
|
|
|
|
return ret
|
|
|
|
}
|
2020-01-31 22:17:40 +00:00
|
|
|
|
Scraper refactor middle (#2043)
* Push scrapeByURL into scrapers
Replace ScrapePerfomerByURL, ScrapeMovie..., ... with ScrapeByURL in
the scraperActionImpl interface. This allows us to delete a lot of
repeated code in the scrapers and replace the central part with a
switch on the scraper type.
* Fold name scraping into one call
Follow up on scraper refactoring. Name scrapers use the same code path.
This allows us to restructure some code and kill some functions, adding
variance to the name scraping code. It allows us to remove some code
repetition as well.
* Do not export loop refs.
* Simplify fragment scraping
Generalize fragment scrapers into ScrapeByFragment. This simplifies
fragment code flows into a simpler pathing which should be easier
to handle in the future.
* Eliminate more context.TODO()
In a number of cases, we have a context now. Use the context rather than
TODO() for those cases in order to make those operations cancellable.
* Pass the context for the stashbox scraper
This removes all context.TODO() in the path of the stashbox scraper,
and replaces it with the context that's present on each of the paths.
* Pass the context into subscrapers
Mostly a mechanical update, where we pass in the context for
subscraping. This removes the final context.TODO() in the scraper
code.
* Warn on unknown fields from scripts
A common mistake for new script writers are that they return fields
not known to stash. For instance the name "description" is used rather
than "details".
Decode disallowing unknown fields. If this fails, use a tee-reader to
fall back to the old behavior, but print a warning for the user in this
case. Thus, we retain the old behavior, but print warnings for scripts
which fails the more strict unknown-fields detection.
* Nil-check before running the postprocessing chain
Fixes panics when scraping returns nil values.
* Lift nil-ness in post-postprocessing
If the struct we are trying to post-process is nil, we shouldn't
enter the postprocessing flow at all. Pass the struct as a value
rather than a pointer, eliminating nil-checks as we go. Use the
top-level postProcess call to make the nil-check and then abort there
if the object we are looking at is nil.
* Allow conversion routines to handle values
If we have a non-pointer type in the interface, we should also convert
those into ScrapedContent. Otherwise we get errors on deprecated
functions.
2021-11-26 00:20:06 +00:00
|
|
|
func (q *xpathQuery) subScrape(ctx context.Context, value string) mappedQuery {
|
|
|
|
doc, err := q.scraper.loadURL(ctx, value)
|
2020-01-31 22:17:40 +00:00
|
|
|
|
|
|
|
if err != nil {
|
2020-07-21 04:06:25 +00:00
|
|
|
logger.Warnf("Error getting URL '%s' for sub-scraper: %s", value, err.Error())
|
|
|
|
return nil
|
2020-01-31 22:17:40 +00:00
|
|
|
}
|
|
|
|
|
2020-07-21 04:06:25 +00:00
|
|
|
return q.scraper.getXPathQuery(doc)
|
2020-05-18 02:26:20 +00:00
|
|
|
}
|