Before this change, the workers of pipe call with n_process != 1 were
stopped by calling `terminate` on the processes. However, terminating a
process can leave queues, pipes, and other concurrent data structures in
an invalid state.
With this change, we stop using terminate and take the following approach
instead:
* When the all documents are processed, the parent process puts a
sentinel in the queue of each worker.
* The parent process then calls `join` on each worker process to
let them finish up gracefully.
* Worker processes break from the queue processing loop when the
sentinel is encountered, so that they exit.
We need special handling when one of the workers encounters an error and
the error handler is set to raise an exception. In this case, we cannot
rely on the sentinel to finish all workers -- the queue is a FIFO queue
and there may be other work queued up before the sentinel. We use the
following approach to handle error scenarios:
* The parent puts the end-of-work sentinel in the queue of each worker.
* The parent closes the reading-end of the channel of each worker.
* Then:
- If the worker was waiting for work, it will encounter the sentinel
and break from the processing loop.
- If the worker was processing a batch, it will attempt to write
results to the channel. This will fail because the channel was
closed by the parent and the worker will break from the processing
loop.
* Support registered vectors
* Format
* Auto-fill [nlp] on load from config and from bytes/disk
* Only auto-fill [nlp]
* Undo all changes to Language.from_disk
* Expand BaseVectors
These methods are needed in various places for training and vector
similarity.
* isort
* More linting
* Only fill [nlp.vectors]
* Update spacy/vocab.pyx
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Revert changes to test related to auto-filling [nlp]
* Add vectors registry
* Rephrase error about vocab methods for vectors
* Switch to dummy implementation for BaseVectors.to_ops
* Add initial draft of docs
* Remove example from BaseVectors docs
* Apply suggestions from code review
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update website/docs/api/basevectors.mdx
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix type and lint bpemb example
* Update website/docs/api/basevectors.mdx
---------
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* modified: spacy/language.py
- corrected typo in docstring for :method:`Language.replace_listeners`
- added noqa comment on unused local variable assignment in :method:`Language.from_config` as I wasn't sure if it should be unassigned
modified: website/docs/api/language.mdx
- corrected typo in `Language.replace_listeners` markdown
* modified: spacy/language.py
- removed noqa comment
---------
Co-authored-by: Ian Thompson <ian.thompson@hrblock.com>
* `Language.replace_listeners`: Pass the replaced listener and the `tok2vec` pipe to the callback
* Update developer docs
* `isort` fixes
* Add error message to assertion
* Add clarification to dev docs
* Replace assertion with exception
* Doc fixes
When sourcing a component, the object from the original pipeline is added to the new pipeline as the same object. This creates a situation where there are several attributes that cannot be in sync between the original pipeline and the new pipeline at the same time for this one object:
* component.name
* component.listener_map / component.listening_components for tok2vec and transformer
When running replace_listeners on a component, the config is not updated correctly if the state of the component is incorrect for the current pipeline (in particular changes that should be applied from model.attrs["replace_listener_cfg"] as used in spacy-transformers) due to the fact that:
* find_listeners relies on component.name to set the name in the listener_map
* replace_listeners relies on listener_map to determine how to modify the configs
In addition, there are several places where pipeline components are modified and the listener map and/or internal component names aren't currently updated.
In cases where there is a component shared by two pipelines that cannot be in sync, this PR chooses to prioritize the most recently modified or initialized pipeline. There is no actual solution with the current source behavior that will make both pipelines usable, so the current pipeline is updated whenever components are added/renamed/removed or the pipeline is initialized for training.
* Use isort with Black profile
* isort all the things
* Fix import cycles as a result of import sorting
* Add DOCBIN_ALL_ATTRS type definition
* Add isort to requirements
* Remove isort from build dependencies check
* Typo
* Add scorer option to return per-component scores
Add `per_component` option to `Language.evaluate` and `Scorer.score` to
return scores keyed by `tokenizer` (hard-coded) or by component name.
Add option to `evaluate` CLI to score by component. Per-component scores
can only be saved to JSON.
* Update help text and messages
* change logging call for spacy.LookupsDataLoader.v1
* substitutions in language and _util
* various more substitutions
* add string formatting guidelines to contribution guidelines
* Add equality definition for vectors
This re-uses the check from sourcing components.
* Use the equality check
* Format
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Change enable/disable behavior so that arguments take precedence over config options. Extend error message on conflict. Add warning message in case of overwriting config option with arguments.
* Fix tests in test_serialize_pipeline.py to reflect changes to handling of enable/disable.
* Fix type issue.
* Move comment.
* Move comment.
* Issue UserWarning instead of printing wasabi message. Adjust test.
* Added pytest.warns(UserWarning) for expected warning to fix tests.
* Update warning message.
* Move type handling out of fetch_pipes_status().
* Add global variable for default value. Use id() to determine whether used values are default value.
* Fix default value for disable.
* Rename DEFAULT_PIPE_STATUS to _DEFAULT_EMPTY_PIPES.
* adding unit test for spacy.load with disable/exclude string arg
* allow pure strings in from_config
* update docs
* upstream type adjustements
* docs update
* make docstring more consistent
* Update spacy/language.py
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* two more cleanups
* fix type in internal method
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Enable flag on spacy.load: foundation for include, enable arguments.
* Enable flag on spacy.load: fixed tests.
* Enable flag on spacy.load: switched from pretrained model to empty model with added pipes for tests.
* Enable flag on spacy.load: switched to more consistent error on misspecification of component activity. Test refactoring. Added to default config.
* Enable flag on spacy.load: added support for fields not in pipeline.
* Enable flag on spacy.load: removed serialization fields from supported fields.
* Enable flag on spacy.load: removed 'enable' from config again.
* Enable flag on spacy.load: relaxed checks in _resolve_component_activation_status() to allow non-standard pipes.
* Enable flag on spacy.load: fixed relaxed checks for _resolve_component_activation_status() to allow non-standard pipes. Extended tests.
* Enable flag on spacy.load: comments w.r.t. resolution workarounds.
* Enable flag on spacy.load: remove include fields. Update website docs.
* Enable flag on spacy.load: updates w.r.t. changes in master.
* Implement Doc.from_json(): update docstrings.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Implement Doc.from_json(): remove newline.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Implement Doc.from_json(): change error message for E1038.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Enable flag on spacy.load: wrapped docstring for _resolve_component_status() at 80 chars.
* Enable flag on spacy.load: changed exmples for enable flag.
* Remove newline.
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Fix docstring for Language._resolve_component_status().
* Rename E1038 to E1042.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Pipe name override in config: added check with warning, added removal of name override from config, extended tests.
* Pipoe name override in config: added pytest UserWarning.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* fixing argument order for rehearse
* rehearse test for ner and tagger
* rehearse bugfix
* added test for parser
* test for multilabel textcat
* rehearse fix
* remove debug line
* Update spacy/tests/training/test_rehearse.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Update spacy/tests/training/test_rehearse.py
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Kádár Ákos <akos@onyx.uvt.nl>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Auto-format code with black
* add black requirement to dev dependencies and pin to 22.x
* ignore black dependency for comparison with setup.cfg
Co-authored-by: explosion-bot <explosion-bot@users.noreply.github.com>
Co-authored-by: svlandeg <svlandeg@github.com>
* Improve typing hints for Matcher.__call__
* Add typing hints for DependencyMatcher
* Add typing hints to underscore extensions
* Update Doc.tensor type (requires numpy 1.21)
* Fix typing hints for Language.component decorator
* Use generic np.ndarray type in Doc to avoid numpy version update
* Fix mypy errors
* Fix cyclic import caused by Underscore typing hints
* Use Literal type from spacy.compat
* Update matcher.pyi import format
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* Use Vectors.shape rather than Vectors.data.shape
* Use Vectors.size rather than Vectors.data.size
* Add Vectors.to_ops to move data between different ops
* Add documentation for Vector.to_ops
Exclude strings from `Vector.to_bytes()` comparions for v3.2+ `Vectors`
that now include the string store so that the source vector comparison
is only comparing the vectors and not the strings.
* make nlp.pipe() return None docs when no exceptions are (re-)raised during error handling
* Remove changes other than as_tuples test
* Only check warning count for one process
* Fix types
* Format
Co-authored-by: Xi Bai <xi.bai.ed@gmail.com>
* Add support for fasttext-bloom hash-only vectors
Overview:
* Extend `Vectors` to have two modes: `default` and `ngram`
* `default` is the default mode and equivalent to the current
`Vectors`
* `ngram` supports the hash-only ngram tables from `fasttext-bloom`
* Extend `spacy.StaticVectors.v2` to handle both modes with no changes
for `default` vectors
* Extend `spacy init vectors` to support ngram tables
The `ngram` mode **only** supports vector tables produced by this
fork of fastText, which adds an option to represent all vectors using
only the ngram buckets table and which uses the exact same ngram
generation algorithm and hash function (`MurmurHash3_x64_128`).
`fasttext-bloom` produces an additional `.hashvec` table, which can be
loaded by `spacy init vectors --fasttext-bloom-vectors`.
https://github.com/adrianeboyd/fastText/tree/feature/bloom
Implementation details:
* `Vectors` now includes the `StringStore` as `Vectors.strings` so that
the API can stay consistent for both `default` (which can look up from
`str` or `int`) and `ngram` (which requires `str` to calculate the
ngrams).
* In ngram mode `Vectors` uses a default `Vectors` object as a cache
since the ngram vectors lookups are relatively expensive.
* The default cache size is the same size as the provided ngram vector
table.
* Once the cache is full, no more entries are added. The user is
responsible for managing the cache in cases where the initial
documents are not representative of the texts.
* The cache can be resized by setting `Vectors.ngram_cache_size` or
cleared with `vectors._ngram_cache.clear()`.
* The API ends up a bit split between methods for `default` and for
`ngram`, so functions that only make sense for `default` or `ngram`
include warnings with custom messages suggesting alternatives where
possible.
* `Vocab.vectors` becomes a property so that the string stores can be
synced when assigning vectors to a vocab.
* `Vectors` serializes its own config settings as `vectors.cfg`.
* The `Vectors` serialization methods have added support for `exclude`
so that the `Vocab` can exclude the `Vectors` strings while serializing.
Removed:
* The `minn` and `maxn` options and related code from
`Vocab.get_vector`, which does not work in a meaningful way for default
vector tables.
* The unused `GlobalRegistry` in `Vectors`.
* Refactor to use reduce_mean
Refactor to use reduce_mean and remove the ngram vectors cache.
* Rename to floret
* Rename to floret in error messages
* Use --vectors-mode in CLI, vector init
* Fix vectors mode in init
* Remove unused var
* Minor API and docstrings adjustments
* Rename `--vectors-mode` to `--mode` in `init vectors` CLI
* Rename `Vectors.get_floret_vectors` to `Vectors.get_batch` and support
both modes.
* Minor updates to Vectors docstrings.
* Update API docs for Vectors and init vectors CLI
* Update types for StaticVectors
* Raise an error when multiprocessing is used on a GPU
As reported in #5507, a confusing exception is thrown when
multiprocessing is used with a GPU model and the `fork` multiprocessing
start method:
cupy.cuda.runtime.CUDARuntimeError: cudaErrorInitializationError: initialization error
This change checks whether one of the models uses the GPU when
multiprocessing is used. If so, raise a friendly error message.
Even though multiprocessing can work on a GPU with the `spawn` method,
it quickly runs the GPU out-of-memory on real-world data. Also,
multiprocessing on a single GPU typically does not provide large
performance gains.
* Move GPU multiprocessing check to Language.pipe
* Warn rather than error when using multiprocessing with GPU models
* Improve GPU multiprocessing warning message.
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Reduce API assumptions
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
* Update spacy/language.py
* Update spacy/language.py
* Test that warning is thrown with GPU + multiprocessing
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: Sofie Van Landeghem <svlandeg@users.noreply.github.com>
* add custom protocols in spacy.ty
* add a test for the new types in spacy.ty
* import Example when type checking
* some type fixes
* put Protocol in compat
* revert update check back to hasattr
* runtime_checkable in compat as well
* 🚨 Ignore all existing Mypy errors
* 🏗 Add Mypy check to CI
* Add types-mock and types-requests as dev requirements
* Add additional type ignore directives
* Add types packages to dev-only list in reqs test
* Add types-dataclasses for python 3.6
* Add ignore to pretrain
* 🏷 Improve type annotation on `run_command` helper
The `run_command` helper previously declared that it returned an
`Optional[subprocess.CompletedProcess]`, but it isn't actually possible
for the function to return `None`. These changes modify the type
annotation of the `run_command` helper and remove all now-unnecessary
`# type: ignore` directives.
* 🔧 Allow variable type redefinition in limited contexts
These changes modify how Mypy is configured to allow variables to have
their type automatically redefined under certain conditions. The Mypy
documentation contains the following example:
```python
def process(items: List[str]) -> None:
# 'items' has type List[str]
items = [item.split() for item in items]
# 'items' now has type List[List[str]]
...
```
This configuration change is especially helpful in reducing the number
of `# type: ignore` directives needed to handle the common pattern of:
* Accepting a filepath as a string
* Overwriting the variable using `filepath = ensure_path(filepath)`
These changes enable redefinition and remove all `# type: ignore`
directives rendered redundant by this change.
* 🏷 Add type annotation to converters mapping
* 🚨 Fix Mypy error in convert CLI argument verification
* 🏷 Improve type annotation on `resolve_dot_names` helper
* 🏷 Add type annotations for `Vocab` attributes `strings` and `vectors`
* 🏷 Add type annotations for more `Vocab` attributes
* 🏷 Add loose type annotation for gold data compilation
* 🏷 Improve `_format_labels` type annotation
* 🏷 Fix `get_lang_class` type annotation
* 🏷 Loosen return type of `Language.evaluate`
* 🏷 Don't accept `Scorer` in `handle_scores_per_type`
* 🏷 Add `string_to_list` overloads
* 🏷 Fix non-Optional command-line options
* 🙈 Ignore redefinition of `wandb_logger` in `loggers.py`
* ➕ Install `typing_extensions` in Python 3.8+
The `typing_extensions` package states that it should be used when
"writing code that must be compatible with multiple Python versions".
Since SpaCy needs to support multiple Python versions, it should be used
when newer `typing` module members are required. One example of this is
`Literal`, which is available starting with Python 3.8.
Previously SpaCy tried to import `Literal` from `typing`, falling back
to `typing_extensions` if the import failed. However, Mypy doesn't seem
to be able to understand what `Literal` means when the initial import
means. Therefore, these changes modify how `compat` imports `Literal` by
always importing it from `typing_extensions`.
These changes also modify how `typing_extensions` is installed, so that
it is a requirement for all Python versions, including those greater
than or equal to 3.8.
* 🏷 Improve type annotation for `Language.pipe`
These changes add a missing overload variant to the type signature of
`Language.pipe`. Additionally, the type signature is enhanced to allow
type checkers to differentiate between the two overload variants based
on the `as_tuple` parameter.
Fixes#8772
* ➖ Don't install `typing-extensions` in Python 3.8+
After more detailed analysis of how to implement Python version-specific
type annotations using SpaCy, it has been determined that by branching
on a comparison against `sys.version_info` can be statically analyzed by
Mypy well enough to enable us to conditionally use
`typing_extensions.Literal`. This means that we no longer need to
install `typing_extensions` for Python versions greater than or equal to
3.8! 🎉
These changes revert previous changes installing `typing-extensions`
regardless of Python version and modify how we import the `Literal` type
to ensure that Mypy treats it properly.
* resolve mypy errors for Strict pydantic types
* refactor code to avoid missing return statement
* fix types of convert CLI command
* avoid list-set confustion in debug_data
* fix typo and formatting
* small fixes to avoid type ignores
* fix types in profile CLI command and make it more efficient
* type fixes in projects CLI
* put one ignore back
* type fixes for render
* fix render types - the sequel
* fix BaseDefault in language definitions
* fix type of noun_chunks iterator - yields tuple instead of span
* fix types in language-specific modules
* 🏷 Expand accepted inputs of `get_string_id`
`get_string_id` accepts either a string (in which case it returns its
ID) or an ID (in which case it immediately returns the ID). These
changes extend the type annotation of `get_string_id` to indicate that
it can accept either strings or IDs.
* 🏷 Handle override types in `combine_score_weights`
The `combine_score_weights` function allows users to pass an `overrides`
mapping to override data extracted from the `weights` argument. Since it
allows `Optional` dictionary values, the return value may also include
`Optional` dictionary values.
These changes update the type annotations for `combine_score_weights` to
reflect this fact.
* 🏷 Fix tokenizer serialization method signatures in `DummyTokenizer`
* 🏷 Fix redefinition of `wandb_logger`
These changes fix the redefinition of `wandb_logger` by giving a
separate name to each `WandbLogger` version. For
backwards-compatibility, `spacy.train` still exports `wandb_logger_v3`
as `wandb_logger` for now.
* more fixes for typing in language
* type fixes in model definitions
* 🏷 Annotate `_RandomWords.probs` as `NDArray`
* 🏷 Annotate `tok2vec` layers to help Mypy
* 🐛 Fix `_RandomWords.probs` type annotations for Python 3.6
Also remove an import that I forgot to move to the top of the module 😅
* more fixes for matchers and other pipeline components
* quick fix for entity linker
* fixing types for spancat, textcat, etc
* bugfix for tok2vec
* type annotations for scorer
* add runtime_checkable for Protocol
* type and import fixes in tests
* mypy fixes for training utilities
* few fixes in util
* fix import
* 🐵 Remove unused `# type: ignore` directives
* 🏷 Annotate `Language._components`
* 🏷 Annotate `spacy.pipeline.Pipe`
* add doc as property to span.pyi
* small fixes and cleanup
* explicit type annotations instead of via comment
Co-authored-by: Adriane Boyd <adrianeboyd@gmail.com>
Co-authored-by: svlandeg <sofie.vanlandeghem@gmail.com>
Co-authored-by: svlandeg <svlandeg@github.com>
* use language-matching to allow language code aliases
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* link to "IETF language tags" in docs
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* Make requirements consistent
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* change "two-letter language ID" to "IETF language tag" in language docs
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* use langcodes 3.2 and handle language-tag errors better
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
* all unknown language codes are ImportErrors
Signed-off-by: Elia Robyn Speer <elia@explosion.ai>
Co-authored-by: Elia Robyn Speer <elia@explosion.ai>
Since a component may reference anything in the vocab, share the full
vocab when loading source components and vectors (which will include
`strings` as of #8909).
When loading a source component from a config, save and restore the
vocab state after loading source pipelines, in particular to preserve
the original state without vectors, since `[initialize.vectors]
= null` skips rather than resets the vectors.
The vocab references are not synced for components loaded with
`Language.add_pipe(source=)` because the pipelines are already loaded
and not necessarily with the same vocab. A warning could be added in
`Language.create_pipe_from_source` that it may be necessary to save and
reload before training, but it's a rare enough case that this kind of
warning may be too noisy overall.
* Accept Doc input in pipelines
Allow `Doc` input to `Language.__call__` and `Language.pipe`, which
skips `Language.make_doc` and passes the doc directly to the pipeline.
* ensure_doc helper function
* avoid running multiple processes on GPU
* Update spacy/tests/test_language.py
Co-authored-by: svlandeg <svlandeg@github.com>
Matthew Honnibal