In the AUR optdepends means that the package can run without optdepends
installed. In polybar most features, if enabled at compile time, cannot
run without their dependencies and will crash polybar. Now the
optdepends only contains truly optional dependencies.
Polybar can run without the i3-wm package because it only relies on the
`i3` executable and is not dynamically linked against any library in i3.
* Use GNUInstallDirs instead of hardcoded paths
This change should be a no-op in the normal case and at the same time make it
easier to customise polybar builds on systems with special needs.
* Avoid creating /usr/share/doc/polybar/polybar/*
* Include GNUInstallDirs for the doc target itself
* cmake: Don't try to set CMAKE_INSTALL_* variables
Since we include GNUInstallDirs all these variables are already set
* cmake: Print install directories in summary
* fix(cmake): Make doc-only work like normal build
This is kind of a dirty hack to force CMAKE_INSTALL_DOCDIR to use
`polybar` as the project name when only polybar-doc is built.
Maybe it is wiser at some point to be able to do a doc only build (and
install) that can be done from the top level project. Then we would also
not need to include GNUInstallDirs here
### Breaking Changes:
None
### Changelog
**New Config Options**
The following config options were added
In the `[settings]` section:
* `pseudo-transparency`
In `internal/cpu`:
* `ramp-coreload-spacing`, spacing between elements in `<ramp-coreload>` elements
* `%percentage-sum%` in `label`. Shows sum of all percentages
In `custom/script`:
* `double-click-left`
* `double-click-middle`
* `double-click-right`
In `internal/pulseaudio`:
* `interval`, volume increase and decrease steps in percentage points
In `internal/memory`:
* `bar-swap-used`
* `bar-swap-free`
* `ramp-swap-used`
* `ramp-swap-free`
**Deprecations**
* `tray-transparent` in the bar section is no longer used. The tray now always uses pseudo-transparency
**Features**
* volume: adjustable volume steps (#1364), see #1361
* memory: Add progress bars and ramps for swap (#1325)
* render: pseudo-transparency (always used in the tray) (#595)
* cpu:
* Configurable spacing in between coreloads (#1472), see #1389
* Non-normalized cpu load (#1517), see #1516
* script: Double click actions (#1442)
* net: Support for bridge interfaces (#1528), see #1522
* token: zero pad tokens when min-width value starts with a `0` (#1341), see #1332
**Fixes**
* config: Use font patterns detected on system in sample config (#1350)
* net: Disconnected module when SSID is only an emoji (#1371), see #1367
* tray: Tray overlapping with bar (#1392), see #591
* build: Several build errors (#1395, #1454, #1470, jaagr/xpp#12, #1493), see #1447, #1469, #750, #1492
* mpd: format-online-prefix not working (#1402), see #1399
* font: Crash for some font-patterns (#1451), see #1435
* script:
* Only `%counter%` or `%pid%` token usable, never both (#1456)
* click actions with colons in them (#1457), see #984
* renderer: Bar locks up when xorg composite extension is disabled (#1430), see #1425
Breaking Changes:
* `0 < label-NAME-maxlen < 3` will now throw an exception and disable the containing module, if ellipsis is enabled for that label. (#1198)
Changelog:
Deprecations:
* `internal/volume` is now called `internal/alsa` (#967)
* temperature: The `%temperature%` is deprecated in favor of `%temperature-c%`(#897)
* mpd: `icon-repeatone` is deprecated in favor of `icon-single` (#1295), see #1279
Features:
* feat(mpd): Add support for icon-consume (#861)
* feat(bspwm): Add workspace separator (#942)
* feat(i3): Add workspace separator (#938), see #929
* feat(build): Make polybar build on FreeBSD (#931, jaagr/xpp#8), see #239
* feat(volume): Add pulseaudio backend (#779)
* feat(script): Add %pid% token for tail commands (#934)
* feat(temp): Add temperature tokens without unit (#897)
* feat(memory): Add memory used/free ramp (#1038), see #1037
* feat(memory): Add swap tokens (#1018)
* feat(net): Add unknown-as-up option (#1077), see #457
* feat(config): Support fractional size and offset (#972), see #953
* feat(xwindow): Add label-empty (#1136)
* feat(battery): Add animation-discharging (analog to animation-charging) (#1190)
* feat(config): Support pixel offset for bar size and offset values (#1224)
* feat(mpd): Add `%album-artist%` token (#1263)
* feat(net): Add local_ip6 token (#1239), see #1234
* feat(net): Add nl80211 support (#1009), see #277
Fixes:
* fix(mpd): Wrong elapsed time when after standby (#921), see #915
* fix(config): Wrong min, maxlen when using the same token multiple times (#974), see #971
* fix(battery): use power_now correctly (#958), see #928
* fix(mpd): Crash when mpd isn't running (#983), see #979
* fix(xworkspaces): Respect 'enable-scroll' (#1002)
* fix(xbacklight): Respect 'enable-scroll' (#1014)
* fix(build): support xcb-proto >=1.13 (jaagr/xpp#11), see #973
* fix(mpd): Respect MPD_HOST env variable (#1025), see #1007
* fix(i3): Reconnect i3 IPC socket on restart/error (#1099), see #762
* fix(cursor): Occasional crash on mouseover (#1124), see #1117
* fix(net): Mark 'not connected' on querying failure (#1171), see #1163
* fix(gcc): Fix -Wstringop-truncation warning (#1216, jaagr/i3ipcpp#7), see #1215
* fix(builder): Don't truncate colors with same channels (#1217), see #1183
* fix(bspwm): Consistent behavior when scrolling through multiple desktops (#986), see #981
* fix(builder): Respect label-ellipsis option (#1198), see #1194
xcb-proto 1.13 finally introduces the eventstruct key that made polybar
not compile. The fix isn't in any release yet, this checks out the
newest xpp commit with the fix during compilation until we release 3.2.0
Fixes#1090
version.sh is supposed to set the GIT_TAG macro in version.hpp to the
output of 'git describe ...', however it uses relative paths and can't
find 'include/version.hpp'
'include/CMakeLists.txt' already has the same functionality so this is
not needed
Breaking Changes:
* Date module no longer supports non-padded specifiers (i.e. `%-d`) and potentially other specifiers, see #792
- Check http://en.cppreference.com/w/cpp/io/manip/put_time to see supported specifiers
* Setting background color to `background-0` with gradients (refer to https://github.com/jaagr/polybar/wiki/Known-Issues)
Changelog:
Features:
* Feat(mpd): State-specific formats (`format-playing`, `format-paused`, `format-stopped`) (#567), see #524
* Feat(ipc): Visibility commands (show, hide, toggle, restart, quit) (b6c5563)
* Feat(shell): Bash completion (#588)
* Feat(menu): `expand-right` option (#658), see #655
* Feat(temperature): hwmon sysfs support (#688), see #404
* Feat(cursor): Change cursors over clickable/scrollable areas (#727), see #721
* Feat(temperature): Fahrenheit and Celsius tokens (#804)
* Feat(mpd): Use mpd name tag or URI as fallback for title-less tracks (#823), see #815
Fixes:
* Fix(i3): Clicking workspaces without index (#521), see #520
* Fix(parser): Prefix options overriding format options (#729), see #544
* Fix(parser): Overline tags (eebf105)
* Fix(process_util): Prefix shell environment variable (`$POLYBAR_SHELL`) (86ff947), see #566
* Fix(parser): `%{R}` tag (reverse colors) (0bd8f1f), see #585
* Fix(renderer): Center block position with tray (389bae2 & #673), see #551 & #672
* Fix(xworkpaces): Active workspace with XMonad (#587), see #411 & #535
* Fix(config): Expand tilde, environment variable (d3b0670 & #724), see #603 & #719
* Fix(build): Remove curlbuild.h (#648), see #647
* Fix(renderer): Off by one error for actions (#663), see #661
* Fix(gcc): GCC 7.1 ([jaagr/xpp/#6](https://github.com/jaagr/xpp/pull/6))
* Fix(fs): Use `bytes_available` for `percentage_used` (138f5fa), see #710
* Fix(fs): Use `f_frsize` for calculations (a682d2a)
* Fix(date): Remove date string length limitation (#745), see #754
* Fix(renderer): Nested actions (#772), see #760 and #758
* Fix(i3): Check and warn if current workspace not found (#826), see #824
* Fix(github): Prevent module disappearing with no connection (#811), see #810
* Fix(renderer): Module gradients (#831), see #759
* Fix(build): Update deprecated jsoncpp Reader
The SRCINFO files should be generated from the PKGBUILDs using
`makepkg --printsrcinfo > .SRCINFO` anyways. It doesn't make sense to
keep a copy in this repo
The `git cherry-pick` command creates a commit and thus requires a git
identity (username and/or email), if those are not set in the git
config, it will fail.
Since we don't really need a commit, this now just applies the changes
without committing them.
Fixes#748
The `curl/curlbuild.h` header issue has been resolved after the last
release, as a consequence the AUR package doesn't build anymore without
altering the source before compiling.
This cherry-picks the fix commit to resolve the compile errors.
patrick96