cpython/Doc/libre.tex

\section{Built-in Module \sectcode{re}}
\label{module-re}

\bimodindex{re}

% XXX Remove before 1.5final release.
{\large\bf This documentation is preliminary and incomplete.  If you
find a bug or documentation error, or just find something unclear,
please send a message to
\code{string-sig@python.org}, and we'll fix it.}

This module provides regular expression matching operations similar to
those found in Perl.  It's 8-bit clean: both patterns and strings may
contain null bytes and characters whose high bit is set.  It is always
available.

Regular expressions use the backslash character (\code{\e}) to
indicate special forms or to allow special characters to be used
without invoking their special meaning.  This collides with Python's
usage of the same character for the same purpose in string literals;
for example, to match a literal backslash, one might have to write
\code{\e\e\e\e} as the pattern string, because the regular expression
must be \code{\e\e}, and each backslash must be expressed as
\code{\e\e} inside a regular Python string literal. 

The solution is to use Python's raw string notation for regular
expression patterns; backslashes are not handled in any special way in
a string literal prefixed with 'r'.  So \code{r"\e n"} is a two
character string containing a backslash and the letter 'n', while
\code{"\e n"} is a one-character string containing a newline.  Usually
patterns will be expressed in Python code using this raw string notation.

% XXX Can the following section be dropped, or should it be boiled down?

%\strong{Please note:} There is a little-known fact about Python string
%literals which means that you don't usually have to worry about
%doubling backslashes, even though they are used to escape special
%characters in string literals as well as in regular expressions.  This
%is because Python doesn't remove backslashes from string literals if
%they are followed by an unrecognized escape character.
%\emph{However}, if you want to include a literal \dfn{backslash} in a
%regular expression represented as a string literal, you have to
%\emph{quadruple} it or enclose it in a singleton character class.
%E.g.\  to extract \LaTeX\ \code{\e section\{{\rm
%\ldots}\}} headers from a document, you can use this pattern:
%\code{'[\e ] section\{\e (.*\e )\}'}.  \emph{Another exception:}
%the escape sequence \code{\e b} is significant in string literals
%(where it means the ASCII bell character) as well as in Emacs regular
%expressions (where it stands for a word boundary), so in order to
%search for a word boundary, you should use the pattern \code{'\e \e b'}.
%Similarly, a backslash followed by a digit 0-7 should be doubled to
%avoid interpretation as an octal escape.

\subsection{Regular Expression Syntax}

A regular expression (or RE) specifies a set of strings that matches
it; the functions in this module let you check if a particular string
matches a given regular expression (or if a given regular expression
matches a particular string, which comes down to the same thing).

Regular expressions can be concatenated to form new regular
expressions; if \emph{A} and \emph{B} are both regular expressions,
then \emph{AB} is also an regular expression.  If a string \emph{p}
matches A and another string \emph{q} matches B, the string \emph{pq}
will match AB.  Thus, complex expressions can easily be constructed
from simpler primitive expressions like the ones described here.  For
details of the theory and implementation of regular expressions,
consult the Friedl book referenced below, or almost any textbook about
compiler construction.

A brief explanation of the format of regular expressions follows.  
%For further information and a gentler presentation, consult XXX somewhere.

Regular expressions can contain both special and ordinary characters.
Most ordinary characters, like '\code{A}', '\code{a}', or '\code{0}',
are the simplest regular expressions; they simply match themselves.  
You can concatenate ordinary characters, so '\code{last}' matches the
characters 'last'.  (In the rest of this section, we'll write RE's in
\code{this special font}, usually without quotes, and strings to be
matched 'in single quotes'.)

Some characters, like \code{|} or \code{(}, are special.  Special
characters either stand for classes of ordinary characters, or affect
how the regular expressions around them are interpreted.

The special characters are:
\begin{itemize}
\item[\code{.}] (Dot.)  In the default mode, this matches any
character except a newline.  If the \code{DOTALL} flag has been
specified, this matches any character including a newline.
\item[\code{\^}] (Caret.)  Matches the start of the string, and in
\code{MULTILINE} mode also immediately after each newline.
\item[\code{\$}] Matches the end of the string, and in
\code{MULTILINE} mode also matches before a newline.
\code{foo} matches both 'foo' and 'foobar', while the regular
expression \code{foo\$} matches only 'foo'.
%
\item[\code{*}] Causes the resulting RE to
match 0 or more repetitions of the preceding RE, as many repetitions
as are possible.  \code{ab*} will
match 'a', 'ab', or 'a' followed by any number of 'b's.
%
\item[\code{+}] Causes the
resulting RE to match 1 or more repetitions of the preceding RE.
\code{ab+} will match 'a' followed by any non-zero number of 'b's; it
will not match just 'a'.
%
\item[\code{?}] Causes the resulting RE to
match 0 or 1 repetitions of the preceding RE.  \code{ab?} will
match either 'a' or 'ab'.
\item[\code{*?}, \code{+?}, \code{??}] The \code{*}, \code{+}, and
\code{?} qualifiers are all \dfn{greedy}; they match as much text as
possible.  Sometimes this behaviour isn't desired; if the RE
\code{<.*>} is matched against \code{<H1>title</H1>}, it will match the
entire string, and not just \code{<H1>}.
Adding \code{?} after the qualifier makes it perform the match in
\dfn{non-greedy} or \dfn{minimal} fashion; as few characters as
possible will be matched.  Using \code{.*?} in the previous
expression will match only \code{<H1>}.
%
\item[\code{\e}] Either escapes special characters (permitting you to match
characters like '*?+\&\$'), or signals a special sequence; special
sequences are discussed below.  

If you're not using a raw string to
express the pattern, remember that Python also uses the
backslash as an escape sequence in string literals; if the escape
sequence isn't recognized by Python's parser, the backslash and
subsequent character are included in the resulting string.  However,
if Python would recognize the resulting sequence, the backslash should
be repeated twice.   This is complicated and hard to understand, so
it's highly recommended that you use raw strings for all but the simplest expressions.
%
\item[\code{[]}] Used to indicate a set of characters.  Characters can
be listed individually, or a range of characters can be indicated by
giving two characters and separating them by a '-'.  Special
characters are not active inside sets.  For example, \code{[akm\$]}
will match any of the characters 'a', 'k', 'm', or '\$'; \code{[a-z]}
will match any lowercase letter and \code{[a-zA-Z0-9]} matches any
letter or digit.  Character classes such as \code{\e w} or \code {\e
S} (defined below) are also acceptable inside a range.  If you want to
include a \code{]} or a \code{-} inside a set, precede it with a
backslash.

Characters \emph{not} within a range can be matched by including a
\code{\^} as the first character of the set; \code{\^} elsewhere will
simply match the '\code{\^}' character.  
%
\item[\code{|}]\code{A|B}, where A and B can be arbitrary REs,
creates a regular expression that will match either A or B.  This can
be used inside groups (see below) as well.  To match a literal '|', 
use \code{\e|}, or enclose it inside a character class, like \code{[|]}.
%
\item[\code{(...)}] Matches whatever regular expression is inside the
parentheses, and indicates the start and end of a group; the contents
of a group can be retrieved after a match has been performed, and can
be matched later in the string with the \code{\e \var{number}} special
sequence, described below.  To match the literals '(' or ')', 
use \code{\e(} or \code{\e)}, or enclose them inside a character
class: \code{[(] [)]}.
%
\item[\code{(?...)}] This is an extension notation (a '?' following a
'(' is not meaningful otherwise).  The first character after the '?'
determines what the meaning and further syntax of the construct is.
Following are the currently supported extensions.
%
\item[\code{(?iLmsx)}] (One or more letters from the set 'i', 'L', 'm', 's',
'x'.) The group matches the empty string; the letters set the
corresponding flags (re.I, re.L, re.M, re.S, re.X) for the entire regular
expression.  This is useful if you wish include the flags as part of
the regular expression, instead of passing a \var{flag} argument to
the \code{compile} function. 
%
\item[\code{(?:...)}] A non-grouping version of regular parentheses.
Matches whatever's inside the parentheses, but the text matched by the
group \emph{cannot} be retrieved after performing a match or
referenced later in the pattern. 
%
\item[\code{(?P<\var{name}>...)}] Similar to regular parentheses, but
the text matched by the group is accessible via the symbolic group
name \var{name}.  Group names must be valid Python identifiers.  A
symbolic group is also a numbered group, just as if the group were not
named.  So the group named 'id' in the example above can also be
referenced as the numbered group 1.

For example, if the pattern is
\code{(?P<id>[a-zA-Z_]\e w*)}, the group can be referenced by its
name in arguments to methods of match objects, such as \code{m.group('id')}
or \code{m.end('id')}, and also by name in pattern text (e.g. \code{(?P=id)}) and
replacement text (e.g. \code{\e g<id>}).
%
\item[\code{(?P=\var{name})}] Matches whatever text was matched by the earlier group named \var{name}.
%
\item[\code{(?\#...)}] A comment; the contents of the parentheses are simply ignored.
%
\item[\code{(?=...)}] Matches if \code{...} matches next, but doesn't consume any of the string.  This is called a lookahead assertion.  For example, 
\code{Isaac (?=Asimov)} will match 'Isaac~' only if it's followed by 'Asimov'.
%
\item[\code{(?!...)}] Matches if \code{...} doesn't match next.  This is a negative lookahead assertion.  For example, 
For example, 
\code{Isaac (?!Asimov)} will match 'Isaac~' only if it's \emph{not} followed by 'Asimov'. 

\end{itemize}

The special sequences consist of '\code{\e}' and a character from the
list below.  If the ordinary character is not on the list, then the
resulting RE will match the second character.  For example,
\code{\e\$} matches the character '\$'.  

\begin{itemize}

%
\item[\code{\e \var{number}}] Matches the contents of the group of the
same number.  Groups are numbered starting from 1.  For example,
\code{(.+) \e 1} matches 'the the' or '55 55', but not 'the end' (note
the space after the group).  This special sequence can only be used to
match one of the first 99 groups.  If the first digit of \var{number}
is 0, or \var{number} is 3 octal digits long, it will not be interpreted
as a group match, but as the character with octal value \var{number}.
%
\item[\code{\e A}] Matches only at the start of the string.
%
\item[\code{\e b}] Matches the empty string, but only at the
beginning or end of a word.  A word is defined as a sequence of
alphanumeric characters, so the end of a word is indicated by
whitespace or a non-alphanumeric character.  Inside a character range,
\code{\e b} represents the backspace character, for compatibility with
Python's string literals.
%
\item[\code{\e B}] Matches the empty string, but only when it is
\emph{not} at the beginning or end of a word.
%
\item[\code{\e d}]Matches any decimal digit; this is
equivalent to the set \code{[0-9]}.
%
\item[\code{\e D}]Matches any non-digit character; this is
equivalent to the set \code{[{\^}0-9]}.
%
\item[\code{\e s}]Matches any whitespace character; this is
equivalent to the set \code{[ \e t\e n\e r\e f\e v]}.
%
\item[\code{\e S}]Matches any non-whitespace character; this is
equivalent to the set \code{[{\^} \e t\e n\e r\e f\e v]}.
%
\item[\code{\e w}]When the LOCALE flag is not specified, matches any alphanumeric character; this is
equivalent to the set \code{[a-zA-Z0-9_]}.  With LOCALE, it will match
the set \code{[0-9_]} plus whatever characters are defined as letters
for the current locale.
%
\item[\code{\e W}]When the LOCALE flag is not specified, matches any
non-alphanumeric character; this is equivalent to the set
\code{[{\^}a-zA-Z0-9_]}.   With LOCALE, it will match any character
not in the set \code{[0-9_]}, and not defined as a letter
for the current locale.

\item[\code{\e Z}]Matches only at the end of the string.
%

\item[\code{\e \e}] Matches a literal backslash.

\end{itemize}

\subsection{Module Contents}

The module defines the following functions and constants, and an exception:

\renewcommand{\indexsubitem}{(in module re)}

\begin{funcdesc}{compile}{pattern\optional{\, flags}}
  Compile a regular expression pattern into a regular expression
  object, which can be used for matching using its \code{match} and
  \code{search} methods, described below.  

  The expression's behaviour can be modified by specifying a
  \var{flags} value.  Values can be any of the following variables,
  combined using bitwise OR (the \code{|} operator).

\begin{itemize}

\item {I or IGNORECASE or \code{(?i)}}

{Perform case-insensitive matching; expressions like \code{[A-Z]} will match
lowercase letters, too.  This is not affected by the current locale.
}
\item {L or LOCALE or \code{(?L)}}

{Make \code{\e w}, \code{\e W}, \code{\e b},
\code{\e B}, dependent on the current locale. 
}

\item {M or MULTILINE or \code{(?m)}}

{When specified, the pattern character \code{\^} matches at the
  beginning of the string and at the beginning of each line
  (immediately following each newline); and the pattern character
\code{\$} matches at the end of the string and at the end of each line
(immediately preceding each newline).
By default, \code{\^} matches only at the beginning of the string, and
\code{\$} only at the end of the string and immediately before the
newline (if any) at the end of the string. 
}

\item {S or DOTALL or \code{(?s)}}

{Make the \code{.} special character any character at all, including a
newline; without this flag, \code{.} will match anything \emph{except}
a newline.} 

\item {X or VERBOSE or \code{(?x)}}

{Ignore whitespace within the pattern
except when in a character class or preceded by an unescaped
backslash, and, when a line contains a \code{\#} neither in a character
class or preceded by an unescaped backslash, all characters from the
leftmost such \code{\#} through the end of the line are ignored.  }

\end{itemize}

  The sequence
%
\bcode\begin{verbatim}
prog = re.compile(pat)
result = prog.match(str)
\end{verbatim}\ecode
%
is equivalent to
%
\bcode\begin{verbatim}
result = re.match(pat, str)
\end{verbatim}\ecode
%
but the version using \code{compile()} is more efficient when the
expression will be used several times in a single program.
%(The compiled version of the last pattern passed to \code{regex.match()} or
%\code{regex.search()} is cached, so programs that use only a single
%regular expression at a time needn't worry about compiling regular
%expressions.)
\end{funcdesc}

\begin{funcdesc}{escape}{string}
  Return \var{string} with all non-alphanumerics backslashed; this is
  useful if you want to match an arbitrary literal string that may have
  regular expression metacharacters in it.
\end{funcdesc}

\begin{funcdesc}{match}{pattern\, string\optional{\, flags}}
  If zero or more characters at the beginning of \var{string} match
  the regular expression \var{pattern}, return a corresponding
  \code{Match} object.  Return \code{None} if the string does not
  match the pattern; note that this is different from a zero-length
  match.
\end{funcdesc}

\begin{funcdesc}{search}{pattern\, string\optional{\, flags}}
  Scan through \var{string} looking for a location where the regular
  expression \var{pattern} produces a match.  Return \code{None} if no
  position in the string matches the pattern; note that this is
  different from finding a zero-length match at some point in the string.
\end{funcdesc}

\begin{funcdesc}{split}{pattern\, string\, \optional{, maxsplit=0}}
  Split \var{string} by the occurrences of \var{pattern}.  If
  capturing parentheses are used in pattern, then occurrences of
  patterns or subpatterns are also returned.
%
\bcode\begin{verbatim}
>>> re.split('[\W]+', 'Words, words, words.')
['Words', 'words', 'words', '']
>>> re.split('([\W]+)', 'Words, words, words.')
['Words', ', ', 'words', ', ', 'words', '.', '']
\end{verbatim}\ecode
%
  This function combines and extends the functionality of
  the old \code{regex.split()} and \code{regex.splitx()}.
\end{funcdesc}

\begin{funcdesc}{sub}{pattern\, repl\, string\optional{, count=0}}
Return the string obtained by replacing the leftmost non-overlapping
occurrences of \var{pattern} in \var{string} by the replacement
\var{repl}.  If the pattern isn't found, \var{string} is returned
unchanged.  \var{repl} can be a string or a function; if a function,
it is called for every non-overlapping occurance of \var{pattern}.
The function takes a single match object argument, and returns the
replacement string.  For example:
%
\bcode\begin{verbatim}
>>> def dashrepl(matchobj):
...    if matchobj.group(0) == '-': return ' '
...    else: return '-'
>>> re.sub('-{1,2}', dashrepl, 'pro----gram-files')
'pro--gram files'
\end{verbatim}\ecode
%
The pattern may be a string or a 
regex object; if you need to specify
regular expression flags, you must use a regex object, or use
embedded modifiers in a pattern; e.g.
%
\bcode\begin{verbatim}
sub("(?i)b+", "x", "bbbb BBBB") returns 'x x'.
\end{verbatim}\ecode
%
The optional argument \var{count} is the maximum number of pattern
occurrences to be replaced; count must be a non-negative integer, and
the default value of 0 means to replace all occurrences.

Empty matches for the pattern are replaced only when not adjacent to a
previous match, so \code{sub('x*', '-', 'abc')} returns '-a-b-c-'.
\end{funcdesc}

\begin{funcdesc}{subn}{pattern\, repl\, string\optional{, count=0}}
Perform the same operation as \code{sub()}, but return a tuple
\code{(new_string, number_of_subs_made)}.
\end{funcdesc}

\begin{excdesc}{error}
  Exception raised when a string passed to one of the functions here
  is not a valid regular expression (e.g., unmatched parentheses) or
  when some other error occurs during compilation or matching.  (It is
  never an error if a string contains no match for a pattern.)
\end{excdesc}

\subsection{Regular Expression Objects}
Compiled regular expression objects support the following methods and
attributes:

\renewcommand{\indexsubitem}{(re method)}
\begin{funcdesc}{match}{string\optional{\, pos}\optional{\, endpos}}
  If zero or more characters at the beginning of \var{string} match
  this regular expression, return a corresponding
  \code{MatchObject} instance.  Return \code{None} if the string does not
  match the pattern; note that this is different from a zero-length
  match.
  
  The optional second parameter \var{pos} gives an index in the string
  where the search is to start; it defaults to \code{0}.  The
  \code{'\^'} pattern character will match at the index where the
  search is to start.

  The optional parameter \var{endpos} limits how far the string will
  be searched; it will be as if the string is \var{endpos} characters
  long, so only the characters from \var{pos} to \var{endpos} will be
  searched for a match.
\end{funcdesc}

\begin{funcdesc}{search}{string\optional{\, pos}\optional{\, endpos}}
  Scan through \var{string} looking for a location where this regular
  expression produces a match.  Return \code{None} if no
  position in the string matches the pattern; note that this is
  different from finding a zero-length match at some point in the string.
  
  The optional \var{pos} and \var{endpos} parameters have the same
  meaning as for the \code{match} method.
\end{funcdesc}

\begin{funcdesc}{split}{string\, \optional{, maxsplit=0}}
Identical to the \code{split} function, using the compiled pattern.
\end{funcdesc}

\begin{funcdesc}{sub}{repl\, string\optional{, count=0}}
Identical to the \code{sub} function, using the compiled pattern.
\end{funcdesc}

\begin{funcdesc}{subn}{repl\, string\optional{, count=0}}
Identical to the \code{subn} function, using the compiled pattern.
\end{funcdesc}

\renewcommand{\indexsubitem}{(regex attribute)}

\begin{datadesc}{flags}
The flags argument used when the regex object was compiled, or 0 if no
flags were provided.
\end{datadesc}

\begin{datadesc}{groupindex}
A dictionary mapping any symbolic group names (defined by 
\code{?P<\var{id}>}) to group numbers.  The dictionary is empty if no
symbolic groups were used in the pattern.
\end{datadesc}

\begin{datadesc}{pattern}
The pattern string from which the regex object was compiled.
\end{datadesc}

\subsection{MatchObjects}
\code{Matchobject} instances support the following methods and attributes:

\begin{funcdesc}{group}{\optional{g1, g2, ...}}
Returns one or more groups of the match.  If there is a single
\var{index} argument, the result is a single string; if there are
multiple arguments, the result is a tuple with one item per argument.
If the \var{index} is zero, the corresponding return value is the
entire matching string; if it is in the inclusive range [1..99], it is
the string matching the the corresponding parenthesized group.  If no
such group exists, the corresponding result is
\code{None}.

If the regular expression uses the \code{(?P<\var{name}>...)} syntax,
the \var{index} arguments may also be strings identifying groups by
their group name.

A moderately complicated example:
\bcode\begin{verbatim}
m = re.match(r"(?P<int>\d+)\.(\d*)", '3.14')
\end{verbatim}\ecode
%
After performing this match, \code{m.group(1)} is \code{'3'}, as is \code{m.group('int')}.
\code{m.group(2)} is \code{'14'}.
\end{funcdesc}

\begin{funcdesc}{groups}{}
Return a tuple containing all the subgroups of the match, from 1 up to
however many groups are in the pattern.  Groups that did not
participate in the match have values of \code{None}.  If the tuple
would only be one element long, a string will be returned instead.  
\end{funcdesc}

\begin{funcdesc}{start}{group}
\end{funcdesc}

\begin{funcdesc}{end}{group}
Return the indices of the start and end of the substring
matched by \var{group}.  Return \code{None} if \var{group} exists but
did not contribute to the match.  For a match object
\code{m}, and a group \code{g} that did contribute to the match, the
substring matched by group \code{g} (equivalent to \code{m.group(g)}) is
\bcode\begin{verbatim}
    m.string[m.start(g):m.end(g)]
\end{verbatim}\ecode
%
Note that
\code{m.start(\var{group})} will equal \code{m.end(\var{group})} if
\var{group} matched a null string.  For example, after \code{m =
re.search('b(c?)', 'cba')}, \code{m.start(0)} is 1, \code{m.end(0)} is
2, \code{m.start(1)} and \code{m.end(1)} are both 2, and
\code{m.start(2)} raises an \code{IndexError} exception.

\end{funcdesc}

\begin{funcdesc}{span}{group}
Return the 2-tuple \code{(start(\var{group}), end(\var{group}))}.
Note that if \var{group} did not contribute to the match, this is
\code{(None, None)}.
\end{funcdesc}

\begin{datadesc}{pos}
The value of \var{pos} which was passed to the
\code{search} or \code{match} function.  This is the index into the
string at which the regex engine started looking for a match. 
\end{datadesc}

\begin{datadesc}{endpos}
The value of \var{endpos} which was passed to the
\code{search} or \code{match} function.  This is the index into the
string beyond which the regex engine will not go.
\end{datadesc}

\begin{datadesc}{re}
The regular expression object whose \code{match()} or \code{search()} method
produced this \code{MatchObject} instance.
\end{datadesc}

\begin{datadesc}{string}
The string passed to \code{match()} or \code{search()}.
\end{datadesc}

\begin{seealso}
\seetext Jeffrey Friedl, \emph{Mastering Regular Expressions},
O'Reilly.  The Python material in this book dates from before the re
module, but it covers writing good regular expression patterns in
great detail. 
\end{seealso}