From 16aafcd85ba47227673c81b7f4a07bb580102838 Mon Sep 17 00:00:00 2001 From: Greg Ward Date: Sun, 9 Apr 2000 04:06:44 +0000 Subject: [PATCH] Got started for real on this manual. Completely untested and unread -- just checking it in so I can move things around in the CVS repository. --- Doc/dist/dist.tex | 569 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 567 insertions(+), 2 deletions(-) diff --git a/Doc/dist/dist.tex b/Doc/dist/dist.tex index 9df592fd2b8..913899fe521 100644 --- a/Doc/dist/dist.tex +++ b/Doc/dist/dist.tex @@ -1,12 +1,577 @@ \documentclass{howto} \usepackage{ltxmarkup} +\usepackage{distutils} -\title{Installing Python Modules} +\title{Distributing Python Modules} -% Hey wow, Guido didn't write this one either! \author{Greg Ward} \authoraddress{E-mail: \email{gward@python.net}} + +\newcommand{\XXX}[1]{\textbf{**#1**}} + + \begin{document} + +\section{Introduction} +\label{sec:intro} + +In the past, Python module developers have not had much infrastructure +support for distributing modules, nor have Python users had much support +for installing and maintaining third-party modules. With the +introduction of the Python Distribution Utilities (Distutils for short) +in Python 1.6, this situation should start to improve. + +This document only covers using the Distutils to distribute your Python +modules. Using the Distutils does not tie you to Python 1.6, though: +the Distutils work just fine with Python 1.5, and it is reasonable (and +expected to become commonplace) to expect users of Python 1.5 to +download and install the Distutils separately before they can install +your modules. Python 1.6 users, of course, won't have to add anything +to their Python installation in order to use the Distutils to install +third-party modules. + +This document concentrates on the role of developer/distributor: if +you're looking for information on installing Python modules, you should +refer to the ``Installing Python Modules'' manual. + + +\section{Concepts & Terminology} +\label{sec:concepts} + +Using the Distutils is quite simple, both for module developers and for +users/administrators installing third-party modules. As a developer, +your responsibilites (apart from writing solid, well-documented and +well-tested code, of course!) are: +\begin{itemize} +\item write a setup script (\file{setup.py} by convention) +\item (optional) write a setup configuration file +\item create a source distribution +\item (optional) create one or more built (binary) distributions +\end{itemize} +Each of these tasks is covered in this document. + +Not all module developers have access to a multitude of platforms, so +it's not always feasible to expect them to create a multitude of built +distributions. It is hoped that a class of intermediaries, called +\emph{packagers}, will arise to take address this need. Packagers will +take source distributions released by module developers, build them on +one or more platforms, and release the resulting built distributions. +Thus, users on the most popular platforms will be able to install most +popular Python module distributions in the most natural way for their +platform, without having to run a single setup script or compile a line +of code. + + +\subsection{A simple example} +\label{sec:simple-example} + +The setup script is usually quite simple, although since it's written in +Python, there are no arbitrary limits to what you can do. If all you +want to do is distribute a module called \module{foo}, contained in a +file \file{foo.py}, then you can get away with as little as this: +\begin{verbatim} +from distutils.core import setup +setup (name = "foo", + version = "1.0", + py_modules = ["foo"]) +\end{verbatim} +Some observations: +\begin{itemize} +\item all information that you supply to the Distutils is supplied as + keyword arguments to the \func{setup()} function +\item those keyword arguments fall into two categories: package + meta-data (name, version number) and information about what's in the + package (list of pure modules, in this case) +\item modules are specified by module name, not filename (the same will + hold true for packages and extensions) +\item it's recommended that you supply a little more meta-data, in + particular your name, email address and a URL for the project +\end{itemize} + +To create a source distribution for this module, you would run +\begin{verbatim} +python setup.py sdist +\end{verbatim} +which will create an archive file (e.g., tarball on Unix, zip file on +Windows) containing your setup script, \file{setup.py}, and your module, +\file{foo.py}. The archive file will be named \file{Foo-1.0.tar.gz} (or +\file{.zip}), and will unpack into a directory \file{Foo-1.0}. + +If an end-user wishes to install your \module{foo} module, all she has +to do is download \file{Foo-1.0.tar.gz}) (or \file{.zip}), unpack it, +and---from the \file{Foo-1.0} directory---run +\begin{verbatim} +python setup.py install +\end{verbatim} +which will ultimately copy \file{foo.py} to the appropriate directory +for third-party modules in their Python installation. + +This simple example demonstrates some fundamental concepts of the +Distutils: first, both developers and installers have the same basic +user interface, i.e. the setup script. The difference is which +Distutils \emph{commands} they use: the \command{sdist} command is +almost exclusively for module developers, while \command{install} is +more often for installers (although most developers will want to install +their own code occasionally). + +\XXX{only partially implemented}% +If you want to make things really easy for your users, you can create +one or more built distributions for them. For instance, if you are +running on a Windows machine, and want to make things easy for other +Windows users, you can create an executable installer (the most +appropriate type of built distribution for this platform) with the +\command{bdist\_wise} command. (Wise is the installation tool used to +create Windows installers for Python itself, so we have adopted it for +use by any Python module distribution. You'll need to have version XXX +of Wise installed on your system for the \command{bdist\_wise} to work; +it's available from \url{http://foo/bar/baz}. For example: +\begin{verbatim} +python setup.py bdist_wise +\end{verbatim} +will create an executable installer, \file{Foo-1_0.exe}, in the current +directory. + +\XXX{not implemented yet} +Other \command{bdist\_*} commands exist for RPM-based Linux systems +(\command{bdist\_rpm}), Debian-based Linux systems +(\command{bdist\_deb}), ... + + +\subsection{General Python terminology} +\label{sec:python-terms} + +If you're reading this document, you probably have a good idea of what +modules, extensions, and so forth are. Nevertheless, just to be sure +that everyone is operating from a common starting point, we offer the +following glossary of common Python terms: +\begin{description} +\item[module] the basic unit of code reusability in Python: a block of + code imported by some other code. There are three types of modules + that concern us here: pure Python modules, extension modules, and + packages. +\item[pure Python module] a module written in Python and contained in a + single \file{.py} file (and possibly associated \file{.pyc} and/or + \file{.pyo} files). Sometimes referred to as a ``pure module.'' +\item[extension module] a module written in the low-level language of + the Python implemention: C/C++ for CPython, Java for JPython. + Typically contained in a single dynamically loadable pre-compiled + file, e.g. a shared object (\file{.so}) file for CPython extensions on + Unix, a DLL (given the \file{.pyd} extension) for CPython extensions + on Windows, or a Java class file for JPython extensions. +\item[package] a module that contains other modules; typically contained + in a directory in the filesystem and distinguished from other + directories by the presence of a file \file{\_\_init\_\_.py}. +\end{description} + + +\subsection{Distutils-specific terminology} +\label{sec:distutils-term} + +The following terms apply more specifically to the domain of +distributing Python modules using the Distutils: +\begin{description} +\item[module distribution] a collection of Python modules distributed + together as a single downloadable resource and meant to be installed + \emph{en masse}. Examples of some well-known module distributions are + Numeric Python, PyXML, PIL (the Python Imaging Library), or + mxDateTime. (This would be called a \emph{package}, except that term + is already spoken for in the Python context: a single module + distribution may contain zero, one, or many Python packages.) +\item[pure module distribution] a module distribution that contains only + pure Python modules and packages. Sometimes referred to as a ``pure + distribution.'' +\item[non-pure module distribution] a module distribution that contains + at least one extension module. Sometimes referred to as a ``non-pure + distribution.'' +\item[distribution root] the top-level directory of your source tree (or + source distribution); the directory where \file{setup.py} exists and + is run from +\end{description} + + +\section{Writing the Setup Script} +\label{sec:setup-script} + +The setup script is the centre of all activity in building, +distributing, and installing modules using the Distutils. The main +purpose of the setup script is to describe your module distribution to +the Distutils, so that the various commands that operate on your modules +do the right thing. As we saw in section~\ref{sec:simple-example} +above, the setup script consists mainly of a call to \func{setup()}, and +all information supplied to the Distutils is suppled as keyword +arguments to \func{setup()}. + +Here's a slightly more involved example, which we'll follow for the next +couple of sections: the Distutils' own setup script. (Keep in mind that +although the Distutils are included with Python 1.6, they also have an +independent existence so that Python 1.5 users can use them to install +other module distributions.) + +\begin{verbatim} +#!/usr/bin/env python + +from distutils.core import setup + +setup (name = "Distutils", + version = "1.0", + description = "Python Module Distribution Utilities", + author = "Greg Ward", + author_email = "gward@python.net", + url = "http://www.python.org/sigs/distutils-sig/", + + packages = ['distutils', 'distutils.command'], + ) +\end{verbatim} +There are only two differences between this and the trivial one-file +distribution presented in section~\ref{sec:simple-example}: more +meta-data, and the specification of pure Python modules by package, +rather than by module. This is important since the Distutils consist of +a couple of dozen modules split into (so far) two packages; an explicit +list of every module would be tedious to generate and difficult to +maintain. + + +\subsection{Package directories} +\label{sec:package-dirs} + +The \option{packages} option tells the Distutils to process (build, +distribute, install, etc.) all pure Python modules found in each package +mentioned in the \option{packages} list. In order to do this, of +course, there has to be a correspondence between package names and +directories in the filesystem. The default correspondence is the most +obvious one, i.e. package \package{distutils} is found in the directory +\file{distutils} relative to the distribution root. Thus, when you say +\code{packages = ['foo']} in your setup script, you are promising that +the Distutils will find a file \file{foo/\_\_init\_\_.py} (which might +be spelled differently on your system, but you get the idea) relative to +the directory where your setup script lives. (If you break this +promise, the Distutils will issue a warning but process the broken +package anyways.) + +If you use a different convention to lay out your source directory, +that's no problem: you just have to supply the \option{package\_dir} +option to tell the Distutils about your convention. For example, say +you keep all Python source under \file{lib}, so that modules not in any +package are right in \file{lib}, modules in the \package{foo} package +are in \file{lib/foo}, and so forth. Then you would put +\begin{verbatim} +package_dir = {'': 'lib'} +\end{verbatim} +in your setup script. (The keys to this dictionary are package names, +and an empty package name stands for the ``root package,'' i.e. no +package at all. The values are directory names relative to your +distribution root.) In this case, when you say +\code{packages = ['foo']}, you are promising that the file +\file{lib/foo/\_\_init\_\_.py} exists. + +Another possible convention is to put the \package{foo} package right in +\file{lib}, the \package{foo.bar} package in \file{lib/bar}, etc. This +would be written in the setup script as +\begin{verbatim} +package_dir = {'foo': 'lib'} +\end{verbatim} +Note that a \code{\var{package}: \var{dir}} entry in the +\option{package\_dir} option implicitly applies to all packages below +\var{package}, so the \package{foo.bar} case is automatically handled +here. In this example, having \code{packages = ['foo', 'foo.bar']} +tells the Distutils to look for \file{lib/__init__.py} and +\file{lib/bar/__init__.py}. + + +\subsection{Listing individual modules} +\label{sec:listing-modules} + +For a small module distribution, you might prefer to list all modules +rather than listing packages---especially the case of a single module +that goes in the ``root package'' (i.e., no package at all). This +simplest case was shown in section~\ref{sec:simple-example}; here is a +slightly more involved example: +\begin{verbatim} +py_modules = ['mod1', 'pkg.mod2'] +\end{verbatim} +This describes two modules, one of them in the ``root'' package, the +other in the \package{pkg} package. Again, the default +package/directory layout implies that these two modules can be found in +\file{mod1.py} and \file{pkg/mod2.py}, and that \file{pkg/__init__.py} +exists as well. And again, you can override the package/directory +layout using the \option{package\_dir} option. \XXX{not sure if this is + actually true---must check!} + + +\section{Writing the Setup Configuration File} +\label{sec:setup-config} + +\XXX{not implemented yet!} + +Often, it's not possible to write down everything needed to build a +distribution \emph{a priori}. You need to get some information from the +user, or from the user's system, in order to proceed. For example, you +might include an optional extension module that provides an interface to +a particular C library. If that library is installed on the user's +system, then you can build your optional extension---but you need to +know where to find the header and library file. If it's not installed, +you need to know this so you can omit your optional extension. + +The preferred way to do this, of course, would be for you to tell the +Distutils which optional features (C libraries, system calls, external +utilities, etc.) you're looking for, and it would inspect the user's +system and try to find them. This functionality may appear in a future +version of the Distutils, but it isn't there now. So, for the time +being, we rely on the user building and installing your software to +provide the necessary information. The vehicle for doing so is the +setup configuration file, \file{setup.cfg}. + +\XXX{need more here!} + + +\section{Creating a Source Distribution} +\label{sec:source-dist} + +As shown in section~\ref{sec:simple-example}, you use the +\command{sdist} command to create a source distribution. In the +simplest case, +\begin{verbatim} +python setup.py sdist +\end{verbatim} +(assuming you haven't specified any \command{sdist} options in the setup +script or config file), \command{sdist} creates the the archive of the +default format for the current platform. The default formats are: +\begin{tableii}{ll}{textrm}% + {Platform}{Default archive format for source distributions} + \lineii{Unix}{gzipped tar file (\file{.tar.gz})} + \lineii{Windows}{zip file} +\end{tableii} +You can specify as many formats as you like using the \option{--formats} +option, for example: +\begin{verbatim} +python setup.py sdist --formats=gztar,zip +\end{verbatim} +to create a gzipped tarball and a zip file. The available formats are: +\begin{tableii}{ll}{textrm}% + {Format}{Description} + \lineii{zip}{zip file (\file{.zip})} + \lineii{gztar}{gzipped tar file (\file{.tar.gz})} + \lineii{ztar}{compressed tar file (\file{.tar.Z})} + \lineii{tar}{tar file (\file{.tar})} +\end{tableii} + + +\subsection{The manifest and manifest template} +\label{sec:manifest} + +Without any additional information, the \command{sdist} command puts a +minimal set of files into the source distribution: +\begin{itemize} +\item all Python source files implied by the \option{py_modules} and + \option{packages} options +\item all C source files mentioned in the \option{ext_modules} or + \option{libraries} options (\XXX{getting C library sources currently + broken -- no get_source_files() method in build_clib.py!}) +\item anything that looks like a test script: \file{test/test*.py} + (currently, the Distutils don't do anything with test scripts except + include them in source distributions, but in the future there will be + a standard for testing Python module distributions) +\item \file{README.txt} (or \file{README}) and \file{setup.py} +\end{itemize} +Sometimes this is enough, but usually you will want to specify +additional files to distribute. The typical way to do this is to write +a \emph{manifest template}, called \file{MANIFEST.in} by default. The +\command{sdist} command processes this template and generates a manifest +file, \file{MANIFEST}. (If you prefer, you can skip the manifest +template and generate the manifest yourself: it just lists one file per +line.) + +The manifest template has one command per line, where each command +specifies a set of files to include or exclude from the source +distribution. For an example, again we turn to the Distutils' own +manifest template: +\begin{verbatim} +include *.txt +recursive-include examples *.txt +recursive-include examples *.py +prune examples/sample?/build +\end{verbatim} +The meanings should be fairly clear: include all files in the +distribution root matching \code{*.txt}, all files anywhere under the +\file{examples} directory matching \code{*.txt} or \code{*.py}, and +exclude all directories matching \code{examples/sample?/build}. There +are several other commands available in the manifest template +mini-language; see section~\ref{sec:sdist-cmd}. + +The order of commands in the manifest template very much matters: +initially, we have the list of default files as described above, and +each command in the template adds to or removes from that list of files. +When we have fully processed the manifest template, we have our complete +list of files. This list is written to the manifest for future +reference, and then used to build the source distribution archive(s). + +We can now see how the \command{sdist} command will build the list of +files to include in the Distutils source distribution: +\begin{enumerate} +\item include all Python source files in the \file{distutils} and + \file{distutils/command} subdirectories (because packages + corresponding to those two directories were mentioned in the + \option{packages} option in the setup script) +\item include \file{test/test*.py} (always included) +\item include \file{README.txt} and \file{setup.py} (always included) +\item include \file{*.txt} in the distribution root (this will find + \file{README.txt} a second time, but such redundancies are weeded out + later) +\item in the sub-tree under \file{examples}, include anything matching + \file{*.txt} +\item in the sub-tree under \file{examples}, include anything matching + \file{*.py} +\item remove all files in the sub-trees starting at directories matching + \file{examples/sample?/build}---this may exclude files included by the + previous two steps, so it's important that the \code{prune} command in + the manifest template comes after the two \code{recursive-include} + commands +\end{itemize} + + +\subsection{Manifest-related options} +\label{sec:manifest-options} + +The normal course of operations for the \command{sdist} command is as +follows: +\begin{itemize} +\item if \file{MANIFEST.in} is more recent than \file{MANIFEST}, or + \file{MANIFEST} doesn't exist at all, recreate \file{MANIFEST} by + processing \file{MANIFEST.in} +\item use the list of files now in \file{MANIFEST} (either just + generated or read in) to create the source distribution archive(s) +\end{itemize} +There are a couple of options that modify this behaviour. + +First, you might want to force the manifest to be regenerated---for +example, if you have added or removed files or directories that match an +existing pattern in the manifest template, you should regenerate the +manifest: +\begin{verbatim} +python setup.py sdist --force-manifest +\end{verbatim} +\XXX{this is stupid, but is there a better way to do it without + reprocessing MANIFEST.in every single bloody time?} + +Or, you might just want to (re)generate the manifest, but not create a +source distribution: +\begin{verbatim} +python setup.py sdist --manifest-only +\end{verbatim} +(\option{--manifest-only} implies \option{--force-manifest}.) + +If you don't want to use the default file set, you can supply the +\option{--no-defaults} option. If you use \option{--no-defaults} and +don't supply a manifest template (or it's empty, or nothing matches the +patterns in it), then your source distribution will be empty. + + +\section{Creating Built Distributions} +\label{sec:built-dist} + + + +\section{Examples} +\label{sec:examples} + + +\subsection{Pure Python distribution (by module)} +\label{sec:pure-mod} + + +\subsection{Pure Python distribution (by package)} +\label{sec:pure-pkg} + + +\subsection{Single extension module} +\label{sec:single-ext} + + +\subsection{Multiple extension modules} +\label{sec:multiple-ext} + + +\subsection{Putting it all together} + + +\section{Reference} +\label{sec:ref} + + +\subsection{Building modules: the \command{build} command family} +\label{sec:build-cmds} + +\subsubsection{\command{build}} +\label{sec:build-cmd} + +\subsubsection{\command{build\_py}} +\label{sec:build-py-cmd} + +\subsubsection{\command{build\_ext}} +\label{sec:build-ext-cmd} + +\subsubsection{\command{build\_clib}} +\label{sec:build-clib-cmd} + + +\subsection{Installing modules: the \command{install} command family} +\label{sec:install-cmd} + + +\subsection{Cleaning up: the \command{clean} command} +\label{sec:clean-cmd} + + +\subsection{Creating a source distribution: the \command{sdist} command} +\label{sec:sdist-cmd} + + +\XXX{fragment moved down from above: needs context!} +The manifest template commands are: +\begin{tableii}{ll}{command}{Command}{Description} + \lineii{include \var{pat}}{include all files matching \var{pat}} + \lineii{exclude \var{pat}}{exclude all files matching \var{pat}} + \lineii{recursive-include \var{dir} \var{pat}} + {include all files under \var{dir} matching \var{pat}} + \lineii{recursive-exclude \var{dir} \var{pat}} + {exclude all files under \var{dir} matching \var{pat}} + \lineii{global-include \var{pat}} + {include all files anywhere in the source tree matching \var{pat}} + \lineii{global-exclude \var{pat}} + {exclude all files anywhere in the source tree matching \var{pat}} + \lineii{prune \var{dir}}{exclude all files under \var{dir}} + \lineii{graft \var{dir}}{include all files under \var{dir}} +\end{tableii} +The patterns here are Unix-style ``glob'' patterns: \code{*} matches any +sequence of regular filename characters, \code{?} matches any single +regular filename character, and \code{[\var{range}]} matches any of the +characters in \var{range} (e.g., \code{a-z}, \code{a-zA-Z}, +\code{a-f0-9_.}). The definition of ``regular filename character'' is +platform-specific: on Unix it is anything except slash; on Windows +anything except backslash or colon; on Mac OS anything except colon. +\XXX{Windows and Mac OS support not there yet} + + +\subsection{Creating a ``built'' distribution: the \command{bdist} command + family} +\label{sec:bdist-cmds} + + +\subsubsection{\command{blib}} + +\subsubsection{\command{blib\_dumb}} + +\subsubsection{\command{blib\_rpm}} + +\subsubsection{\command{blib\_wise}} + + + + + + + + \end{document}