1997-08-14 23:12:18 +00:00
\section { Built-in Module \sectcode { re} }
\label { module-re}
\bimodindex { re}
% XXX Remove before 1.5final release.
{ \large \bf The \code { re} module is still in the process of being
developed, and more features will be added in future 1.5 alphas and
betas. This documentation is also preliminary and incomplete. If you
find a bug or documentation error, or just find something unclear,
please send a message to
\code { string-sig@python.org} , and we'll fix it.}
This module provides regular expression matching operations similar to
those found in Perl. It's 8-bit
clean: both patterns and strings may contain null bytes and characters
whose high bit is set. It is always available.
Regular expressions use the backslash character (\code { \e } ) to
indicate special forms or to allow special characters to be used
without invoking their special meaning. This collides with Python's
usage of the same character for the same purpose in string literals;
for example, to match a literal backslash, one might have to write
\code { \e \e \e \e } as the pattern string, because the regular expression must be \code { \e \e } , and each backslash must be expressed as \code { \e \e } inside a regular Python string literal.
The solution is to use Python's raw string notation for regular
expression patterns; backslashes are not handled in any special way in
a string literal prefixed with 'r'. So \code { r"\e n"} is a two
character string containing a backslash and the letter 'n', while
\code { "\e n"} is a one-character string containing a newline. Usually
patterns will be expressed in Python code using this raw string notation.
% XXX Can the following section be dropped, or should it be boiled down?
%\strong{Please note:} There is a little-known fact about Python string
%literals which means that you don't usually have to worry about
%doubling backslashes, even though they are used to escape special
%characters in string literals as well as in regular expressions. This
%is because Python doesn't remove backslashes from string literals if
%they are followed by an unrecognized escape character.
%\emph{However}, if you want to include a literal \dfn{backslash} in a
%regular expression represented as a string literal, you have to
%\emph{quadruple} it or enclose it in a singleton character class.
%E.g.\ to extract \LaTeX\ \code{\e section\{{\rm
%\ldots}\}} headers from a document, you can use this pattern:
%\code{'[\e ] section\{\e (.*\e )\}'}. \emph{Another exception:}
%the escape sequence \code{\e b} is significant in string literals
%(where it means the ASCII bell character) as well as in Emacs regular
%expressions (where it stands for a word boundary), so in order to
%search for a word boundary, you should use the pattern \code{'\e \e b'}.
%Similarly, a backslash followed by a digit 0-7 should be doubled to
%avoid interpretation as an octal escape.
\subsection { Regular Expressions}
A regular expression (or RE) specifies a set of strings that matches
it; the functions in this module let you check if a particular string
matches a given regular expression (or if a given regular expression
matches a particular string, which comes down to the same thing).
Regular expressions can be concatenated to form new regular
expressions; if \emph { A} and \emph { B} are both regular expressions,
then \emph { AB} is also an regular expression. If a string \emph { p}
matches A and another string \emph { q} matches B, the string \emph { pq}
will match AB. Thus, complex expressions can easily be constructed
from simpler primitive expressions like the ones described here. For
details of the theory and implementation of regular expressions,
consult the Friedl book referenced below, or almost any textbook about
compiler construction.
A brief explanation of the format of regular expressions follows. For
further information and a gentler presentation, consult XXX somewhere.
Regular expressions can contain both special and ordinary characters.
Most ordinary characters, like '\code { A} ', '\code { a} ', or '\code { 0} ',
are the simplest regular expressions; they simply match themselves.
You can concatenate ordinary characters, so '\code { last} ' matches the
characters 'last'. (In the rest of this section, we'll write RE's in
\code { this special font} , usually without quotes, and strings to be
matched 'in single quotes'.)
Some characters, like \code { |} or \code { (} , are special. Special
characters either stand for classes of ordinary characters, or affect
how the regular expressions around them are interpreted.
The special characters are:
\begin { itemize}
\item [\code{.}] (Dot.) In the default mode, this matches any
character except a newline. If the \code { DOTALL} flag has been
specified, this matches any character including a newline.
\item [\code{\^}] (Caret.) Matches the start of the string, and in
\code { MULTILINE} mode also immediately after each newline.
\item [\code{\$}] Matches the end of the string.
\code { foo} matches both 'foo' and 'foobar', while the regular
expression '\code { foo\$ } ' matches only 'foo'.
%
\item [\code{*}] Causes the resulting RE to
match 0 or more repetitions of the preceding RE, as many repetitions
as are possible. \code { ab*} will
match 'a', 'ab', or 'a' followed by any number of 'b's.
%
\item [\code{+}] Causes the
resulting RE to match 1 or more repetitions of the preceding RE.
\code { ab+} will match 'a' followed by any non-zero number of 'b's; it
will not match just 'a'.
%
\item [\code{?}] Causes the resulting RE to
match 0 or 1 repetitions of the preceding RE. \code { ab?} will
match either 'a' or 'ab'.
\item [\code{*?}, \code{+?}, \code{??}] The \code { *} , \code { +} , and
\code { ?} qualifiers are all \dfn { greedy} ; they match as much text as
possible. Sometimes this behaviour isn't desired; if the RE
\code { <.*>} is matched against \code { <H1>title</H1>} , it will match the
entire string, and not just \code { <H1>} .
Adding \code { ?} after the qualifier makes it perform the match in
\dfn { non-greedy} or \dfn { minimal} fashion; as few characters as
possible will be matched. Using \code { .*?} in the previous
expression, it will match only \code { <H1>} .
%
\item [\code{\e}] Either escapes special characters (permitting you to match
characters like '*?+\& \$ '), or signals a special sequence; special
sequences are discussed below.
If you're not using a raw string to
express the pattern, remember that Python also uses the
backslash as an escape sequence in string literals; if the escape
sequence isn't recognized by Python's parser, the backslash and
subsequent character are included in the resulting string. However,
if Python would recognize the resulting sequence, the backslash should
be repeated twice. This is complicated and hard to understand, so
it's highly recommended that you use raw strings.
%
\item [\code{[] } ] Used to indicate a set of characters. Characters can
be listed individually, or a range is indicated by giving two
characters and separating them by a '-'. Special characters are not
active inside sets. For example, \code { [akm\$ ]} will match any of the
characters 'a', 'k', 'm', or '\$ '; \code { [a-z]} will match any
lowercase letter and \code { [a-zA-Z0-9]} matches any letter or digit.
Character classes of the form \code { \e \var { X} } defined below are also acceptable.
If you want to include a \code { ]} or a \code { -} inside a
set, precede it with a backslash.
Characters \emph { not} within a range can be matched by including a
\code { \^ } as the first character of the set; \code { \^ } elsewhere will
simply match the '\code { \^ } ' character.
%
\item [\code{|}] \code { A|B} , where A and B can be arbitrary REs,
creates a regular expression that will match either A or B. This can
be used inside groups (see below) as well. To match a literal '|',
use \code { \e |} , or enclose it inside a character class, like \code { [|]} .
%
\item [\code{( ... )}] Matches whatever regular expression is inside the parentheses, and indicates the start and end of a group; the
contents of a group can be retrieved after a match has been performed,
and can be matched later in the string with the
\code { \e \var { number} } special sequence, described below. To match the
literals '(' or ')',
use \code { \e (} or \code { \e )} , or enclose them inside a character
class: \code { [(] [)]} .
%
\item [\code{(?:...)}] A non-grouping version of regular parentheses.
Matches whatever's inside the parentheses, but the text matched by the
group \emph { cannot} be retrieved after performing a match or
referenced later in the pattern.
%
\item [\code{(?P<\var{name}>...)}] Similar to regular parentheses, but
the text matched by the group is accessible via the symbolic group
name \var { name} . Group names must be valid Python identifiers. A
symbolic group is also a numbered group, just as if the group were not
named. So the group named 'id' in the example above can also be
referenced as the numbered group 1.
For example, if the pattern string is
\code { r'(?P<id>[a-zA-Z_ ]\e w*)'} , the group can be referenced by its
name in arguments to methods of match objects, such as \code { m.group('id')}
or \code { m.end('id')} , and also by name in pattern text (e.g. \code { (?P=id)} ) and
replacement text (e.g. \code { \e g<id>} ).
%
\item [\code{(?\#...)}] A comment; the contents of the parentheses are simply ignored.
%
\item [\code{(?=...)}] Matches if \code { RE} matches next. This is not
implemented as of Python 1.5a3.
%
\item [\code{(?!...)}] Matches if \code { ...} doesn't match next. This is not
implemented as of Python 1.5a3.
\end { itemize}
The special sequences consist of '\code { \e } ' and a character from the
list below. If the ordinary character is not on the list, then the
resulting RE will match the second character. For example,
\code { \e \$ } matches the character '\$ '. Ones where the backslash
should be doubled are indicated.
\begin { itemize}
%
\item [\code{\e \var{number}}] Matches the contents of the group of the
same number. For example, \code { (.+) \e 1} matches 'the the' or '55
55', but not 'the end' (note the space after the group). This special
sequence can only be used to match one of the first 99 groups. If the
first digit of \var { number} is 0, or \var { number} is 3 octal digits
long, it will not interpreted as a group match, but as the character
with octal value \var { number} .
%
\item [\code{\e A}] Matches only at the start of the string.
%
\item [\code{\e b}] Matches the empty string, but only at the
beginning or end of a word. A word is defined as a sequence of
alphanumeric characters, so the end of a word is indicated by
whitespace or a non-alphanumeric character.
%
\item [\code{\e B}] Matches the empty string, but only when it is \emph { not} at the
beginning or end of a word.
%
\item [\code{\e d}] Matches any decimal digit; this is
equivalent to the set \code { [0-9]} .
%
\item [\code{\e D}] Matches any non-digit character; this is
1997-10-22 03:03:44 +00:00
equivalent to the set \code { [{ \^ } 0-9]} .
1997-08-14 23:12:18 +00:00
%
\item [\code{\e s}] Matches any whitespace character; this is
equivalent to the set \code { [ \e t\e n\e r\e f\e v]} .
%
\item [\code{\e S}] Matches any non-whitespace character; this is
1997-10-22 03:03:44 +00:00
equivalent to the set \code { [{ \^ } \e t\e n\e r\e f\e v]} .
1997-08-14 23:12:18 +00:00
%
\item [\code{\e w}] Matches any alphanumeric character; this is
equivalent to the set \code { [a-zA-Z0-9_ ]} .
%
\item [\code{\e W}] Matches any non-alphanumeric character; this is
1997-10-22 03:03:44 +00:00
equivalent to the set \code { [{ \^ } a-zA-Z0-9_ ]} .
1997-08-14 23:12:18 +00:00
\item [\code{\e Z}] Matches only at the end of the string.
%
\item [\code{\e \e}] Matches a literal backslash.
\end { itemize}
\subsection { Module Contents}
The module defines the following functions and constants, and an exception:
\renewcommand { \indexsubitem } { (in module re)}
\begin { funcdesc} { compile} { pattern\optional { \, flags} }
Compile a regular expression pattern into a regular expression
object, which can be used for matching using its \code { match} and
\code { search} methods, described below.
The sequence
%
\bcode \begin { verbatim}
prog = re.compile(pat)
result = prog.match(str)
\end { verbatim} \ecode
%
is equivalent to
%
\bcode \begin { verbatim}
result = re.match(pat, str)
\end { verbatim} \ecode
%
but the version using \code { compile()} is more efficient when multiple
regular expressions are used concurrently in a single program.
%(The compiled version of the last pattern passed to \code{regex.match()} or
%\code{regex.search()} is cached, so programs that use only a single
%regular expression at a time needn't worry about compiling regular
%expressions.)
\end { funcdesc}
\begin { funcdesc} { escape} { string}
Return \var { string} with all non-alphanumerics backslashed; this is
useful if you want to match some variable string which may have
regular expression metacharacters in it.
\end { funcdesc}
\begin { funcdesc} { match} { pattern\, string\optional { \, flags} }
If zero or more characters at the beginning of \var { string} match
the regular expression \var { pattern} , return a corresponding
\code { Match} object. Return \code { None} if the string does not
match the pattern; note that this is different from a zero-length
match.
\end { funcdesc}
\begin { funcdesc} { search} { pattern\, string\optional { \, flags} }
Scan through \var { string} looking for a location where the regular
expression \var { pattern} produces a match. Return \code { None} if no
position in the string matches the pattern; note that this is
different from finding a zero-length match at some point in the string.
\end { funcdesc}
\begin { funcdesc} { split} { pattern\, string\, \optional { , maxsplit=0} }
Split \var { string} by the occurrences of \var { pattern} . If
capturing parentheses are used in pattern, then occurrences of
patterns or subpatterns are also returned.
%
\bcode \begin { verbatim}
>>> re.split('[\W ]+', 'Words, words, words.')
['Words', 'words', 'words', '']
>>> re.split('([\W ]+)', 'Words, words, words.')
['Words', ', ', 'words', ', ', 'words', '.', '']
\end { verbatim} \ecode
%
This function combines and extends the functionality of
\code { regex.split()} and \code { regex.splitx()} .
\end { funcdesc}
\begin { funcdesc} { sub} { pattern\, repl\, string\optional { , count=0} }
Return the string obtained by replacing the leftmost non-overlapping
occurrences of \var { pattern} in \var { string} by the replacement
\var { repl} , which can be a string or the function that returns a string. If the pattern isn't found, \var { string} is returned unchanged. The
pattern may be a string or a regexp object; if you need to specify
regular expression flags, you must use a regexp object, or use
embedded modifiers in a pattern string; e.g.
%
\bcode \begin { verbatim}
sub("(?i)b+", "x", "bbbb BBBB") returns 'x x'.
\end { verbatim} \ecode
%
The optional argument \var { count} is the maximum number of pattern
occurrences to be replaced; count must be a non-negative integer, and
the default value of 0 means to replace all occurrences.
Empty matches for the pattern are replaced only when not adjacent to a
previous match, so \code { sub('x*', '-', 'abc')} returns '-a-b-c-'.
\end { funcdesc}
\begin { funcdesc} { subn} { pattern\, repl\, string\optional { , count=0} }
Perform the same operation as \code { sub()} , but return a tuple
\code { (new_ string, number_ of_ subs_ made)} .
\end { funcdesc}
\begin { excdesc} { error}
Exception raised when a string passed to one of the functions here
is not a valid regular expression (e.g., unmatched parentheses) or
when some other error occurs during compilation or matching. (It is
never an error if a string contains no match for a pattern.)
\end { excdesc}
\subsection { Regular Expression Objects}
Compiled regular expression objects support the following methods and
attributes:
1997-10-05 18:54:07 +00:00
\renewcommand { \indexsubitem } { (re method)}
1997-08-14 23:12:18 +00:00
\begin { funcdesc} { match} { string\optional { \, pos} }
1997-10-05 18:54:07 +00:00
If zero or more characters at the beginning of \var { string} match
this regular expression, return a corresponding
\code { Match} object. Return \code { None} if the string does not
match the pattern; note that this is different from a zero-length
match.
1997-08-14 23:12:18 +00:00
The optional second parameter \var { pos} gives an index in the string
where the search is to start; it defaults to \code { 0} . This is not
completely equivalent to slicing the string; the \code { '\^ '} pattern
character matches at the real begin of the string and at positions
just after a newline, not necessarily at the index where the search
is to start.
\end { funcdesc}
\begin { funcdesc} { search} { string\optional { \, pos} }
1997-10-05 18:54:07 +00:00
Scan through \var { string} looking for a location where this regular
expression produces a match. Return \code { None} if no
position in the string matches the pattern; note that this is
different from finding a zero-length match at some point in the string.
1997-08-14 23:12:18 +00:00
The optional second parameter has the same meaning as for the
\code { match} method.
\end { funcdesc}
\begin { funcdesc} { split} { string\, \optional { , maxsplit=0} }
Identical to the \code { split} function, using the compiled pattern.
\end { funcdesc}
\begin { funcdesc} { sub} { repl\, string\optional { , count=0} }
Identical to the \code { sub} function, using the compiled pattern.
\end { funcdesc}
\begin { funcdesc} { subn} { repl\, string\optional { , count=0} }
Identical to the \code { subn} function, using the compiled pattern.
\end { funcdesc}
\renewcommand { \indexsubitem } { (regex attribute)}
\begin { datadesc} { flags}
The flags argument used when the regex object was compiled, or 0 if no
flags were provided.
\end { datadesc}
\begin { datadesc} { groupindex}
A dictionary mapping any symbolic group names (defined by
\code { ?P<\var { id} >} ) to group numbers. The dictionary is empty if no
symbolic groups were used in the pattern.
\end { datadesc}
\begin { datadesc} { pattern}
The pattern string from which the regex object was compiled.
\end { datadesc}
\subsection { Match Objects}
Match objects support the following methods and attributes:
\begin { funcdesc} { span} { group}
Return the 2-tuple \code { (start(\var { group} ), end(\var { group} ))} .
Note that if \var { group} did not contribute to the match, this is \code { (None,
None)} .
\end { funcdesc}
\begin { funcdesc} { start} { group}
\end { funcdesc}
\begin { funcdesc} { end} { group}
Return the indices of the start and end of the substring matched by
\var { group} . Return \code { None} if \var { group} exists but did not contribute to
the match. Note that for a match object \code { m} , and a group \code { g}
that did contribute to the match, the substring matched by group \code { g} is
\bcode \begin { verbatim}
m.string[m.start(g):m.end(g)]
\end { verbatim} \ecode
%
Note too that \code { m.start(\var { group} )} will equal
\code { m.end(\var { group} )} if \var { group} matched a null string. For example,
after \code { m = re.search('b(c?)', 'cba')} , \code { m.start(0)} is 1,
\code { m.end(0)} is 2, \code { m.start(1)} and \code { m.end(1)} are both
2, and \code { m.start(2)} raises an
\code { IndexError} exception.
\end { funcdesc}
\begin { funcdesc} { group} { \optional { g1, g2, ...} )}
This method is only valid when the last call to the \code { match}
or \code { search} method found a match. It returns one or more
groups of the match. If there is a single \var { index} argument,
the result is a single string; if there are multiple arguments, the
result is a tuple with one item per argument. If the \var { index} is
zero, the corresponding return value is the entire matching string; if
it is in the inclusive range [1..99], it is the string matching the
the corresponding parenthesized group (using the default syntax,
groups are parenthesized using \code { \e (} and \code { \e )} ). If no
such group exists, the corresponding result is \code { None} .
If the regular expression was compiled by \code { symcomp} instead of
\code { compile} , the \var { index} arguments may also be strings
identifying groups by their group name.
\end { funcdesc}
\begin { datadesc} { pos}
The index at which the search or match began.
\end { datadesc}
\begin { datadesc} { re}
The regular expression object whose match() or search() method
produced this match object.
\end { datadesc}
\begin { datadesc} { string}
The string passed to \code { match()} or \code { search()} .
\end { datadesc}
\begin { seealso}
\seetext Jeffrey Friedl, \emph { Mastering Regular Expressions} .
\end { seealso}