cpython/Doc/perl/l2hinit.perl

#LaTeX2HTML Version 96.1 : dot.latex2html-init		-*- perl -*-
#
#  Significantly revised by Fred L. Drake, Jr. <fdrake@acm.org> for use
#  with the Python documentation.
#
#  New name to avoid distributing "dot" files with the Python documentation.
#

package Override;

use Cwd qw(getcwd);


package main;

$HTML_VERSION = 4.0;

$MAX_LINK_DEPTH = 2;
$MAX_SPLIT_DEPTH = 5;      # split at subsections but not sub-subsections
$ADDRESS = '';

$NO_FOOTNODE = 1;
$NUMBERED_FOOTNOTES = 1;

# Python documentation uses section numbers to support references to match
# in the printed and online versions.
#
$SHOW_SECTION_NUMBERS = 1;

$ICONSERVER = '../icons';

# Control where the navigation bars should show up:
$TOP_NAVIGATION = 1;
$BOTTOM_NAVIGATION = 1;
$AUTO_NAVIGATION = 0;

$SUPPRESS_CONTENTS = 0;
$SUPPRESS_INDEXES = 0;

# these exactly match the python.org colors
$BODYTEXT = ('bgcolor="#ffffff" text="#000000"'
	     . ' link="#0000bb"  vlink="#551a8b" alink="#ff0000"');
$CHILDLINE = "\n<p><hr>\n";
$VERBOSITY = 0;

# default # of columns for the indexes
$INDEX_COLUMNS = 2;
$MODULE_INDEX_COLUMNS = 4;


# A little painful, but lets us clean up the top level directory a little,
# and not be tied to the current directory (as far as I can tell).
#
use Cwd;
use File::Basename;
($myname, $mydir, $myext) = fileparse(__FILE__, '\..*');
chop $mydir;			# remove trailing '/'
$mydir = getcwd() . "$dd$mydir"
  unless $mydir =~ s|^/|/|;
$LATEX2HTMLSTYLES = "$mydir$envkey$LATEX2HTMLSTYLES";
push (@INC, $mydir);

($myrootname, $myrootdir, $myext) = fileparse($mydir, '\..*');
chop $myrootdir;


# Hackish way to get the appropriate paper-*/ directory into $TEXINPUTS;
# pass in the paper size (a4 or letter) as the environment variable PAPER
# to add the right directory.  If not given, the current directory is
# added instead for use with HOWTO processing.
#
if (defined $ENV{'PAPER'}) {
    $mytexinputs = "$myrootdir${dd}paper-$ENV{'PAPER'}$envkey";
}
else {
    $mytexinputs = getcwd() . $envkey;
}
$mytexinputs .= "$myrootdir${dd}texinputs";


# Change this variable to change the text added in "About this document...";
# this should be an absolute pathname to get it right.
#
$ABOUT_FILE = "$myrootdir${dd}html${dd}stdabout.dat";


sub custom_driver_hook{
    #
    # This adds the directory of the main input file to $TEXINPUTS; it
    # seems to be sufficiently general that it should be fine for HOWTO
    # processing.
    #
    my $file = @_[0];
    my($jobname,$dir,$ext) = fileparse($file, '\..*');
    $dir = make_directory_absolute($dir);
    $dir =~ s/$dd$//;
    $TEXINPUTS = "$dir$envkey$mytexinputs";
    print "\nadding $dir to \$TEXINPUTS\n";
}

# Defining this allows us to remove all table of contents and index
# processing using an init file; this is required to get rid of the
# Table of Contents or we'd get a blank page.  Based on a suggestion
# from Ross Moore <ross@ics.mq.edu.au>.
#
# Seems to require a more recent version of LaTeX2HTML than I've
# been using, though.
#
sub preprocess{
    if ($SUPPRESS_CONTENTS) {
	s/\\(tableofcontents|listof(figures|tables))/\2/g;
    }
    if ($SUPPRESS_INDEXES) {
	s/\\(print|make)index//g;
    }
}


sub set_icon_size{
    my($name, $w, $h) = @_;
    $iconsizes{$name} = "width=$w height=$h";
}

foreach $name (split(/ /, 'up next previous contents index modules blank')) {
    set_icon_size($name, 32, 32);
}
sub adjust_icon_information{
    # The '_motif' is really annoying, and makes the HTML larger with no value
    # added, so strip it off:
    foreach $name (keys %icons) {
        my $icon = $icons{$name};
        # Strip off the wasteful '_motif':
        $icon =~ s/_motif//;
        # Change the greyed-out icons to be blank:
        $icon =~ s/[a-z]*_gr[.]/blank./;
        # make sure we're using the latest $IMAGE_TYPE
        $icon =~ s/[.](gif|png)$/.$IMAGE_TYPE/;
        $icons{$name} = $icon;
    }
    $icons{'blank'} = 'blank.' . $IMAGE_TYPE;
    
    $CUSTOM_BUTTONS = '';
    $BLANK_ICON = "\n<td>" . img_tag('blank.' . $IMAGE_TYPE) . "</td>";
    $BLANK_ICON =~ s/alt="blank"/alt=""/;
    $NAV_BGCOLOR = " bgcolor=\"#99CCFF\"";
}

adjust_icon_information();


sub make_nav_sectref{
    my($label,$title) = @_;
    if ($title) {
	return ("<b class='navlabel'>$label:</b> "
		. "<span class='sectref'>$title</span>\n");
    }
    return '';
}

sub make_nav_panel{
    my $s;
    $s = "<table align='center' width='100%' cellpadding='0' cellspacing='2'>"
         . "\n<tr>"
	 . "\n<td>$NEXT</td>"
	 . "\n<td>$UP</td>"
	 . "\n<td>$PREVIOUS</td>";
    if ($SUPPRESS_CONTENTS && $SUPPRESS_INDEXES) {
	$s .= ("\n<td align=right$NAV_BGCOLOR width=\"100%\">"
	       . "\n <b class=title>$t_title\&nbsp;\&nbsp;\&nbsp;</b></td>");
    }
    else {
	$s .= ("\n<td align=center$NAV_BGCOLOR width=\"100%\">"
	       . "\n <b class=title>$t_title</b></td>"
	       . ($CONTENTS ? "\n<td>$CONTENTS</td>" : $BLANK_ICON)
	       . "\n<td>$CUSTOM_BUTTONS</td>" # module index
	       . ($INDEX ? "\n<td>$INDEX</td>" : $BLANK_ICON));
    }
    $s .= ("\n</tr></table>"
	   . make_nav_sectref("Next", $NEXT_TITLE)
	   . make_nav_sectref("Up", $UP_TITLE)
	   . make_nav_sectref("Previous", $PREVIOUS_TITLE));
    # remove these; they are unnecessary and cause error from validation
    $s =~ s/ NAME="tex2html\d+"\n//g;
    return $s;
}

sub top_navigation_panel {
    "<div class='navigation'>\n"
      . make_nav_panel()
      . '<br><hr></div>';
}

sub bot_navigation_panel {
    "<p>\n<div class='navigation'><hr>"
      . make_nav_panel()
      . '</div>';
}

sub add_link {
    # Returns a pair (iconic link, textual link)
    my($icon, $current_file, @link) = @_;
    my($dummy, $file, $title) = split($delim,
				      $section_info{join(' ',@link)});
    if ($title && ($file ne $current_file)) {
        $title = purify($title);
	$title = get_first_words($title, $WORDS_IN_NAVIGATION_PANEL_TITLES);
	return (make_href($file, $icon), make_href($file, "$title"))
	}
    elsif ($icon eq $up_visible_mark && $EXTERNAL_UP_LINK) {
 	return (make_href($EXTERNAL_UP_LINK, $icon),
		make_href($EXTERNAL_UP_LINK, "$EXTERNAL_UP_TITLE"))
	}
    elsif (($icon eq $previous_visible_mark
	    || $icon eq $previous_page_visible_mark)
	   && $EXTERNAL_PREV_LINK && $EXTERNAL_PREV_TITLE) {
	return (make_href($EXTERNAL_PREV_LINK, $icon),
		make_href($EXTERNAL_PREV_LINK, "$EXTERNAL_PREV_TITLE"))
	}
    elsif (($icon eq $next_visible_mark
	    ||  $icon eq $next_page_visible_mark)
	   && $EXTERNAL_DOWN_LINK && $EXTERNAL_DOWN_TITLE) {
	return (make_href($EXTERNAL_DOWN_LINK, $icon),
		make_href($EXTERNAL_DOWN_LINK, "$EXTERNAL_DOWN_TITLE"))
	}
    (&inactive_img($icon), "");
}

sub add_special_link {
    my($icon, $file, $current_file) = @_;
    (($file && ($file ne $current_file)) ? make_href($file, $icon) : undef)
}

sub img_tag {
    local($icon) = @_;
    my $alt;
    my $align = " align=bottom ";

    # having this list hardcoded here is really bogus....
    $alt = join('|', 'up', 'next_group', 'previous_group'
		, 'next', 'previous', 'change_begin_right', 'change_begin'
		, 'change_end_right', 'change_end', 'change_delete_right'
		, 'change_delete', 'contents', 'index', 'modules', 'blank');

    if ($icon =~ /(gif|png)$/) {
	$used_icons{$icon} = 1;
	if ($icon =~ /change_(begin|end|delete)_right/) { $align = ' ' };
	my $nav_border = "$NAV_BORDER";
	if ($icon =~ /($alt)/) {
	    $alt = $1;
	    $alt = ""
	      if ($alt eq "blank");
	}
	else {
	    $nav_border = '1';
	    $alt = '[*]';
	};
	if ($LOCAL_ICONS) {
	    return join('', '<img ', $iconsizes{$1}, $align
			,'border=', $nav_border, ' alt="', $alt
			,'" src="', $icon, '">' );
	}
	my $s = join('', '<img ', $iconsizes{$1}, $align,
                     'border=', $nav_border, ' alt="', $alt, "\"\n",
                     ' src="', $ICONSERVER, "/$icon", '">' );
        # if $ICONSERVER starts with "./", remove "./":
        $s =~ s|src="(.\/)+|src="|;
        return $s;
    }
    else {
	return $icon;
    }
}


sub do_cmd_arabic {
    # get rid of that nasty <SPAN CLASS="arabic">...</SPAN>
    local($ctr, $val, $id, $_) = &read_counter_value(@_[0]);
    return ($val ? &farabic($val) : "0") . $_;
}


sub gen_index_id {
    # this is used to ensure common index key generation and a stable sort
    my($str,$extra) = @_;
    sprintf('%s###%s%010d', $str, $extra, ++$global{'max_id'});
}

sub insert_index{
    my($mark,$datafile,$columns,$letters,$prefix) = @_;
    my $prog = "$myrootdir/tools/buildindex.py";
    my $index;
    if ($letters) {
	$index = `$prog --columns $columns --letters $datafile`;
    }
    else {
	$index = `$prog --columns $columns $datafile`;
    }
    s/$mark/$prefix$index/;
}

sub add_idx{
    print "\nBuilding HTML for the index ...";
    close(IDXFILE);
    insert_index($idx_mark, 'index.dat', $INDEX_COLUMNS, 1, '');
}


$idx_module_mark = '<tex2html_idx_module_mark>';
$idx_module_title = 'Module Index';

sub add_module_idx{
    print "\nBuilding HTML for the module index ...";
    my $key;
    my $first = 1;
    my $prevplat = '';
    my $allthesame = 1;
    my $prefix = '';
    foreach $key (keys %Modules) {
	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
	my $plat = "$ModulePlatforms{$key}";
	$plat = ''
	  if ($plat eq $IGNORE_PLATFORM_ANNOTATION);
	if (!$first) {
	    $allthesame = 0
	      if ($prevplat ne $plat);
	}
	else { $first = 0; }
	$prevplat = $plat;
    }
    open(MODIDXFILE, '>modindex.dat') || die "\n$!\n";
    foreach $key (keys %Modules) {
	# dump the line in the data file; just use a dummy seqno field
	my $nkey = $1;
	my $moditem = "$Modules{$key}";
	my $plat = '';
	$key =~ s/<tt>([a-zA-Z0-9._]*)<\/tt>/\1/;
	if ($ModulePlatforms{$key} && !$allthesame) {
	    $plat = (" <em>(<span class='platform'>$ModulePlatforms{$key}"
		     . '</span>)</em>');
	}
	print MODIDXFILE $moditem . $IDXFILE_FIELD_SEP
              . "<tt class='module'>$key</tt>$plat###\n";
    }
    close(MODIDXFILE);
    if (!$allthesame) {
	$prefix = <<PLAT_DISCUSS;


<p> Some module names are followed by an annotation indicating what
platform they are available on.</p>

PLAT_DISCUSS
    }
    insert_index($idx_module_mark, 'modindex.dat', $MODULE_INDEX_COLUMNS, 0,
		 $prefix);
}

# replace both indexes as needed:
sub add_idx_hook{
    add_idx() if (/$idx_mark/);
    add_module_idx() if (/$idx_module_mark/);
    process_python_state();
}


# In addition to the standard stuff, add label to allow named node files and
# support suppression of the page complete (for HTML Help use).
sub do_cmd_tableofcontents {
    local($_) = @_;
#     if ($SUPPRESS_CONTENTS) {
# 	return $_;
#     }
    $TITLE = $toc_title;
    $tocfile = $CURRENT_FILE;
    my($closures,$reopens) = preserve_open_tags();
    anchor_label('contents', $CURRENT_FILE, $_);	# this is added
    join('', "<BR>\n\\tableofchildlinks[off]", $closures
	 , make_section_heading($toc_title, 'H2'), $toc_mark
	 , $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoffigures {
    local($_) = @_;
    $TITLE = $lof_title;
    $loffile = $CURRENT_FILE;
    my($closures,$reopens) = preserve_open_tags();
    anchor_label('lof', $CURRENT_FILE, $_);		# this is added
    join('', "<BR>\n", $closures
	 , make_section_heading($lof_title, 'H2'), $lof_mark
	 , $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_listoftables {
    local($_) = @_;
    $TITLE = $lot_title;
    $lotfile = $CURRENT_FILE;
    my($closures,$reopens) = preserve_open_tags();
    anchor_label('lot', $CURRENT_FILE, $_);		# this is added
    join('', "<BR>\n", $closures
	 , make_section_heading($lot_title, 'H2'), $lot_mark
	 , $reopens, $_);
}
# In addition to the standard stuff, add label to allow named node files.
sub do_cmd_textohtmlinfopage {
    local($_) = @_;
    if ($INFO) {					# 
	anchor_label("about",$CURRENT_FILE,$_);		# this is added
    }							#
    my $the_version = '';				# and the rest is
    if ($t_date) {					# mostly ours
	$the_version = ",\n$t_date";
	if ($PYTHON_VERSION) {
	    $the_version .= ", Release $PYTHON_VERSION";
	}
    }
    $_ = (($INFO == 1)
          ? join('',
                 $close_all,
                 "<strong>$t_title</strong>$the_version\n",
                 `cat $ABOUT_FILE`,
                 $open_all, $_)
          : join('', $close_all, $INFO,"\n", $open_all, $_));
    $_;
}

# $idx_mark will be replaced with the real index at the end
sub do_cmd_textohtmlindex {
    local($_) = @_;
    $TITLE = $idx_title;
    $idxfile = $CURRENT_FILE;
    if (%index_labels) { make_index_labels(); }
    if (($SHORT_INDEX) && (%index_segment)) { make_preindex(); }
    else { $preindex = ''; }
    my $heading = make_section_heading($idx_title, 'h2') . $idx_mark;
    my($pre,$post) = minimize_open_tags($heading);
    anchor_label('genindex',$CURRENT_FILE,$_);		# this is added
    '<br>\n' . $pre . $_;
}

# $idx_module_mark will be replaced with the real index at the end
sub do_cmd_textohtmlmoduleindex {
    local($_) = @_;
    $TITLE = $idx_module_title;
    anchor_label("modindex",$CURRENT_FILE,$_);
    '<p>' . make_section_heading($idx_module_title, "h2")
      . $idx_module_mark . $_;
}

# The bibliography and the index should be treated as separate sections
# in their own HTML files. The \bibliography{} command acts as a sectioning command
# that has the desired effect. But when the bibliography is constructed 
# manually using the thebibliography environment, or when using the
# theindex environment it is not possible to use the normal sectioning 
# mechanism. This subroutine inserts a \bibliography{} or a dummy 
# \textohtmlindex command just before the appropriate environments
# to force sectioning.

# XXX	This *assumes* that if there are two {theindex} environments, the
#	first is the module index and the second is the standard index.  This
#	is sufficient for the current Python documentation, but that's about
#	it.

sub add_bbl_and_idx_dummy_commands {
    my $id = $global{'max_id'};

    s/([\\]begin\s*$O\d+$C\s*thebibliography)/$bbl_cnt++; $1/eg;
    s/([\\]begin\s*$O\d+$C\s*thebibliography)/$id++; "\\bibliography$O$id$C$O$id$C $1"/geo;
    #----------------------------------------------------------------------
    # (FLD) This was added
    if ($SUPPRESS_INDEXES) {
	$CUSTOM_BUTTONS .= img_tag('blank.' . $IMAGE_TYPE);
    }
    else {
	my(@parts) = split(/\\begin\s*$O\d+$C\s*theindex/);
	if (scalar(@parts) == 3) {
	    # Be careful to re-write the string in place, since $_ is *not*
	    # returned explicity;  *** nasty side-effect dependency! ***
	    print "\nadd_bbl_and_idx_dummy_commands ==> adding module index";
	    my $rx = "([\\\\]begin\\s*$O\\d+$C\\s*theindex[\\s\\S]*)"
	      . "([\\\\]begin\\s*$O\\d+$C\\s*theindex)";
	    s/$rx/\\textohtmlmoduleindex \1 \\textohtmlindex \2/o;
	    # Add a button to the navigation areas:
	    $CUSTOM_BUTTONS .= ("<a\n href=\"modindex.html\">"
				. img_tag('modules.'.$IMAGE_TYPE) . "</a>");
	}
	else {
	    $CUSTOM_BUTTONS .= img_tag('blank.' . $IMAGE_TYPE);
	    $global{'max_id'} = $id; # not sure why....
	    s/([\\]begin\s*$O\d+$C\s*theindex)/\\textohtmlindex $1/o;
	    s/[\\]printindex/\\textohtmlindex /o;
	}
    }
    #----------------------------------------------------------------------
    lib_add_bbl_and_idx_dummy_commands()
        if defined(&lib_add_bbl_and_idx_dummy_commands);
}

# The bibliographic references, the appendices, the lists of figures and tables
# etc. must appear in the contents table at the same level as the outermost
# sectioning command. This subroutine finds what is the outermost level and
# sets the above to the same level;

sub set_depth_levels {
    # Sets $outermost_level
    my $level;
    #RRM:  do not alter user-set value for  $MAX_SPLIT_DEPTH
    foreach $level ("part", "chapter", "section", "subsection",
		    "subsubsection", "paragraph") {
	last if (($outermost_level) = /\\($level)$delimiter_rx/);
    }
    $level = ($outermost_level ? $section_commands{$outermost_level} :
	      do {$outermost_level = 'section'; 3;});

    #RRM:  but calculate value for $MAX_SPLIT_DEPTH when a $REL_DEPTH was given
    if ($REL_DEPTH && $MAX_SPLIT_DEPTH) { 
	$MAX_SPLIT_DEPTH = $level + $MAX_SPLIT_DEPTH;
    } elsif (!($MAX_SPLIT_DEPTH)) { $MAX_SPLIT_DEPTH = 1 };

    %unnumbered_section_commands = ('tableofcontents' => $level,
				    'listoffigures' => $level,
				    'listoftables' => $level,
				    'bibliography' => $level,
				    'textohtmlindex' => $level,
				    'textohtmlmoduleindex' => $level);
    $section_headings{'textohtmlmoduleindex'} = 'h1';

    %section_commands = (%unnumbered_section_commands,
			 %section_commands);

    make_sections_rx();
}


# Fix from Ross Moore for ']' in \item[...]; this can be removed once the next
# patch to LaTeX2HTML is released and tested ... if the patch gets included.
# Be very careful to keep this around, just in case things break again!
#
sub protect_useritems {
    local(*_) = @_;
    local($preitems,$thisitem);
    while (/\\item\s*\[/) {
        $preitems .= $`;
	$_ = $';
        $thisitem = $&.'<<'.++$global{'max_id'}.'>>';
        s/^(((($O|$OP)\d+($C|$CP)).*\3|<[^<>]*>|[^\]<]+)*)\]/$thisitem.=$1;''/e;
        $preitems .= $thisitem . '<<' . $global{'max_id'} . '>>]';
	s/^]//;
    }
    $_ = $preitems . $_;
}

# This changes the markup used for {verbatim} environments, and is the
# best way I've found that ensures the <dl> goes on the outside of the
# <pre>...</pre>.
#
# Note that this *must* be done in the init file, not the python.perl
# style support file.  The %declarations must be set before initialize()
# is called in the main LaTeX2HTML script (which happens before style files
# are loaded).
#
%declarations = ('preform' => '<dl><dd><pre class="verbatim"></pre></dl>',
		 %declarations);


# This is added to get rid of the long comment that follows the doctype
# declaration; MSIE5 on NT4 SP4 barfs on it and drops the content of the
# page.
sub make_head_and_body {
    local($title,$body) = @_;
    local($DTDcomment) = '';
    local($version,$isolanguage) = ($HTML_VERSION, 'EN');
    local(%isolanguages) = (  'english',  'EN'   , 'USenglish', 'EN.US'
			    , 'original', 'EN'   , 'german'   , 'DE'
			    , 'austrian', 'DE.AT', 'french'   , 'FR'
			    , 'spanish',  'ES'
			    , %isolanguages );
    $isolanguage = $isolanguages{$default_language};
    $isolanguage = 'EN' unless $isolanguage;
    $title = &purify($title,1);
    eval("\$title = ". $default_title ) unless ($title);

    # allow user-modification of the <TITLE> tag; thanks Dan Young
    if (defined &custom_TITLE_hook) {
	$title = &custom_TITLE_hook($title, $toc_sec_title);
    }

    if ($DOCTYPE =~ /\/\/[\w\.]+\s*$/) { # language spec included
	$DTDcomment = "<!DOCTYPE html PUBLIC \"$DOCTYPE\">\n";
    } else {
	$DTDcomment = "<!DOCTYPE html PUBLIC \"$DOCTYPE//"
	    . ($ISO_LANGUAGE ? $ISO_LANGUAGE : $isolanguage) . "\">\n";
    }

    $STYLESHEET = $FILE.".css" unless $STYLESHEET;
    if (!$charset && $CHARSET) { $charset = $CHARSET; $charset =~ s/_/\-/go; }

    join('', ($DOCTYPE ? $DTDcomment : '' )
	,"<html>\n<head>\n<title>", $title, "</title>\n"
	, &meta_information($title)
	, ($CHARSET && $HTML_VERSION ge "2.1" ?
           "<meta http-equiv=\"Content-Type\" content=\"text/html; charset=$charset\">\n"
           : "" )
	, ($BASE ? "<base href=\"$BASE\">\n" : "" )
	, "<link rel=\"STYLESHEET\" href=\"$STYLESHEET\">"
	, $more_links_mark
	, "\n</head>\n<body $body>\n");
}

1;	# This must be the last line