{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf320
{\fonttbl\f0\fswiss\fcharset0 Helvetica;\f1\fmodern\fcharset0 Courier;\f2\fswiss\fcharset0 ArialMT;
\f3\fnil\fcharset0 LucidaGrande;}
{\colortbl;\red255\green255\blue255;\red174\green0\blue0;}
{\*\listtable{\list\listtemplateid1\listhybrid{\listlevel\levelnfc23\levelnfcn23\leveljc0\leveljcn0\levelfollow0\levelstartat1\levelspace360\levelindent0{\*\levelmarker \{disc\}}{\leveltext\leveltemplateid1\'01\uc0\u8226 ;}{\levelnumbers;}\fi-360\li720\lin720 }{\listname ;}\listid1}}
{\*\listoverridetable{\listoverride\listid1\listoverridecount0\ls1}}
\margl1440\margr1440\vieww14740\viewh11840\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\f0\b\fs28 \cf0 Building BOINC Client and Manager on Macintosh OSX\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\b0\fs24 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc
\cf0 Written by Charlie Fenton\
Last updated 10/11/10\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
This document applies to BOINC version 6.11.9 and later.  It has instructions for building the BOINC Client and Manager for Macintosh OSX.  Information for building science project applications to run under BOINC on Macintosh OSX can be found {\field{\*\fldinst{HYPERLINK "http://boinc.berkeley.edu/trac/wiki/BuildMacApp"}}{\fldrslt here}}.  \
\
Note: the information in this document changes from time to time for different versions of BOINC.  For any version of BOINC source files, the corresponding version of this document can be found in the source tree at:\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f1\fs26 \cf0                    boinc/mac_build/HowToBuildBOINC_XCode.rtf\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0\fs24 \cf0 \
Contents of this document:\
\'95 Important requirements for building BOINC software for the Mac.\
\'95 Cross-Platform Development.\
\'95 Building BOINC Manager, BOINC Client and boinc_cmd.\
\'95 Building BOINC Manager Installer.\
\'95 Debugging and BOINC security.\
\'95 Debugging into wxWidgets.\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\b\fs28 \cf0 Important requirements for building BOINC software for the Mac
\b0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
\pard\pardeftab720\sa260\ql\qnatural
\cf0 Building BOINC for Macintosh OS X is complicated by the fact that Mac OS X is actually 3 different platforms:\
\pard\tx220\tx720\pardeftab720\li720\fi-720\ql\qnatural
\ls1\ilvl0\cf0 {\listtext	\'95	}
\b powerpc-apple-darwin
\b0 : PowerPC processors running OS 10.3.0 and above\
{\listtext	\'95	}
\b i686-apple-darwin
\b0 : 32-bit intel processors running OS 10.4.0 and above\
{\listtext	\'95	}
\b x86_64-apple-darwin
\b0 : 64-bit Intel processors running OS 10.5.0 and above\
\pard\pardeftab720\sa260\ql\qnatural
\cf0 BOINC does not support 64-bit PowerPC applications for the Mac.\
Although BOINC supports 64-bit Intel project applications on Mac OS 10.5.0 and above, the only part of the BOINC client package built as a 64-bit executable is the screensaver coordinator for OS 10.6.x.  The BOINC libraries also include a 64-bit build so that they can be linked with 64-bit project applications.\
You need to take certain steps to ensure that you use only APIs that are available in all the OS versions BOINC supports for each architecture. The best way to accomplish this is to use a single development system running OS 10.6.x and cross-compile for the various platforms. The remainder of this document describes that process.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural

\b \cf0 The above requirements apply not only to BOINC itself, but also to the WxWidgets, JPEG, c-ares and cURL libraries, as well as all project applications
\b0 . Note: only theJPEG library must be built for  the x86_64 architecture, since it is used by the libboinc_graphics_api library.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 Be sure to follow the directions in this document to ensure that these requirements are met.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 \
\pard\pardeftab720\sa260\ql\qnatural
\cf0 Starting with version 6.1.0, the BOINC Client supports only Mac OS X 10.3.9 and later; support for OS 10.3.0 through 10.3.8 has been discontinued. This allows us to build the BOINC Client and Manager using only GCC 4.0, which offers a number of advantages.\
Starting with version 6.10.58,  the BOINC Client supports only Mac OS X 10.4.0 and later.  This allows it to be built with XCode 3.2 under OS 10.6.x, which does not support the Mac OS 10.3.9 SDK. \
\pard\pardeftab720\sa260\qc

\b\fs28 \cf0 Cross-Platform Development
\f2\fs32 \
\pard\pardeftab720\sa260\ql\qnatural

\f0\b0\fs24 \cf0 Apple provides the tools necessary to cross-compile for all three BOINC Mac platform on any Mac running OS 10.6.x.\
You get these tools, including the GCC compilers and system library header files, by installing the XCode Tools package. Building BOINC and the library packages on which it depends requires XCode 3.2 or later running under OS 10.6.x or later. If you have the OS 10.6 installation DVD for your system, you can install XCode Tools at the time you install the OS, or you can install it later by opening the file 
\f1\fs26 Optional Installs/XCode Tools/XCodeTools.mpkg
\f0\fs24 .\
Otherwise, you can download it from Apple's web site (it is large: 1.1 GB). You must be a member of the Apple Developer Connection to download the software, but you can join for free at: {\field{\*\fldinst{HYPERLINK "http://connect.apple.com/"}}{\fldrslt \cf2 http://connect.apple.com}}\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural

\b \cf0 Building BOINC now requires XCode Tools version 3.2 or later. 
\b0  Note that the MacOS10.4u SDK is not automatically included unless you customize the installation; click  the 
\b Customize
\b0  button in the 
\i Installation type
\i0  step when you run the XCode Tools installer.  The MacOS10.4u SDK is required to build wxWidgets (wxMac-2.8.10).\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
Source files are now archived using Subversion.  You can download svnX, a free GUI application for running Subversion from either\
	{\field{\*\fldinst{HYPERLINK "http://www.apple.com/downloads/macosx/development_tools/svnx.html"}}{\fldrslt http://www.apple.com/downloads/macosx/development_tools/svnx.html}}\
or\
	{\field{\*\fldinst{HYPERLINK "http://www.lachoseinteractive.net/en/community/subversion/svnx/"}}{\fldrslt http://www.lachoseinteractive.net/en/community/subversion/svnx/}}\
\
You also need to install Subversion itself in the 
\f1\fs26 /usr/local/bin/
\f3  directory
\f0\fs24 .  By default, OS X and XCode install it in 
\fs26 /
\f1 usr/bin/
\f0\fs24 .  To copy it into 
\f1\fs26 /usr/local/bin/
\f0 , enter the following in the Terminal utility application:\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f1\fs24 \cf0 cd /usr/bin\
sudo cp -p svn* /usr/local/bin\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0 \cf0 \
Enter your administrator password when prompted to do so.\
\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\b\fs28 \cf0 Building BOINC Manager with embedded Core Client\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\b0\fs24 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 BOINC depends on four third-party libraries: wxMac-2.8.10, c-ares-1.6.0, curl-7.19.7, and jpeg-6b.  You can obtain these from the following URLs:\
\
wxMac-2.8.10 (needed  only if you are building the BOINC Manager):\
	{\field{\*\fldinst{HYPERLINK "http://www.wxwidgets.org"}}{\fldrslt 
\f1\fs26 http://www.wxwidgets.org}}
\f1\fs26 \

\f0\fs24 	{\field{\*\fldinst{HYPERLINK "http://prdownloads.sourceforge.net/wxwindows/wxMac-2.8.10.tar.gz"}}{\fldrslt 
\f1\fs26 http://prdownloads.sourceforge.net/wxwindows/wxMac-2.8.10.tar.gz}}
\f1\fs26 \

\f0\fs24 \
curl-7.19.7:\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f1\fs26 \cf0 	{\field{\*\fldinst{HYPERLINK "http://curl.haxx.se"}}{\fldrslt http://curl.haxx.se}}\
	{\field{\*\fldinst{HYPERLINK "http://curl.haxx.se/download/curl-7.19.7.tar.gz"}}{\fldrslt http://curl.haxx.se/download/curl-7.19.7.tar.gz}}\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f0\fs24 \cf0 c-ares-1.6.0 (used by curl):\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f1\fs26 \cf0 	{\field{\*\fldinst{HYPERLINK "http://daniel.haxx.se/projects/c-ares/"}}{\fldrslt http://daniel.haxx.se/projects/c-ares/}}\
	{\field{\*\fldinst{HYPERLINK "http://daniel.haxx.se/projects/c-ares/c-ares-1.6.0.tar.gz"}}{\fldrslt http://daniel.haxx.se/projects/c-ares/c-ares-1.6.0.tar.gz}}\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f0\fs24 \cf0 \
jpeg-6b (needed  only if you are building the BOINC libboinc_graphics_api.a library):\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural

\f1\fs26 \cf0 	{\field{\*\fldinst{HYPERLINK "http://www.ijg.org"}}{\fldrslt http://www.ijg.org}}\
	{\field{\*\fldinst{HYPERLINK "http://dir.filewatcher.com/d/GNU/Other/jpegsrc.v6b.tar.gz.613261.html"}}{\fldrslt http://dir.filewatcher.com/d/GNU/Other/jpegsrc.v6b.tar.gz.613261.html}}\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0\fs24 \cf0 \
\pard\pardeftab720\sa260\ql\qnatural
\cf0 XCode will automatically check compatibility back to OS 10.3 if the following are defined during compilation:\
\pard\tx480\pardeftab480\ql\qnatural\pardirnatural

\f1\fs26 \cf0 \CocoaLigature0 MAC_OS_X_VERSION_MAX_ALLOWED=1030\
MAC_OS_X_VERSION_MIN_REQUIRED=1030\CocoaLigature1 \
\pard\pardeftab720\sa260\ql\qnatural

\f0\fs24 \cf0 \
These are not defined automatically by either the XCode projects which come with wxMac-2.8.10, nor  the AutoMake scripts supplied with wxMac-2.8.10, c-ares-1.6.0, curl-7.19.7, or jpeg-6b.  So be sure to use our special scripts to build these packages.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 [1] Create a parent directory within which to work.  In this description , we will call it BOINC_dev, but you can name it anything you wish.\
\
[2] Put the following 4 directories inside the BOINC_dev folder (omit any you don't need):\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f1\fs26 \cf0     c-ares-1.6.0\
    curl-7.19.7\
    jpeg-6b\
    wxMac-2.8.10\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0\fs24 \cf0 \
Important: do not change the names of any of these 4 directories.\
\
[3] Get the BOINC source tree from Subversion, and put it in the same BOINC_dev folder.  To do this, type the following in Terminal:\
\
\pard\pardeftab720\ql\qnatural

\f1\fs26 \cf0 cd \{path\}/BOINC_dev/
\f0\fs24 \

\f1\fs26 svn co http://boinc.berkeley.edu/svn/trunk/boinc
\f0\fs24   \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
(You may change the name of the 
\f1\fs26 boinc
\f0\fs24  directory to anything you wish.)  Hint: if you have trouble getting this to work, try using 
\f1\fs26 https
\f0\fs24  instead of 
\f1\fs26 http
\f0\fs24 .\
\
The command above retrieves the source code from the HEAD (TRUNK) or development branch of the CVS repository.  For more information on getting the BOINC source code, see:\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
{\field{\*\fldinst{HYPERLINK "http://boinc.berkeley.edu/trac/wiki/SourceCode"}}{\fldrslt 
\f1\fs26 \cf0 http://boinc.berkeley.edu/trac/wiki/SourceCode}}\
\
[4] Run the script to build the c-ares, curl, jpeg and wxMac libraries as follows:\
\
\pard\pardeftab720\ql\qnatural

\f1\fs26 \cf0 cd \{path\}/BOINC_dev/boinc/mac_build/\
source setupForBoinc.sh -clean
\f0\fs24 \
\
If you don't wish to force a full rebuild of everything, omit the -clean argument.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
Note: this script builds c-ares and curl first, followed by jpeg and finally wxMac.  If you haven't downloaded wxMac because you aren't building the BOINC Manager, the script will build c-ares, curl and jpeg.  Likewise, if you downloaded only c-ares and curl because you need neither graphics nor the BOINC Manager, the script will build c-ares and curl before quitting.\
\
[5] Build BOINC as follows:\
\
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural
\cf0 BOINC itself is built  using the 
\b boinc.xcodeproj 
\b0 file.  You can either build directly in XCode
\b  
\b0 (more information below) or run the 
\b BuildMacBOINC.sh
\b0  script:\
\
\pard\pardeftab720\ql\qnatural

\f1\fs26 \cf0 cd \{path\}/BOINC_dev/boinc/mac_build/\
source BuildMacBOINC.sh
\f0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
The complete syntax for this script is\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f1\fs26 \cf0 source BuildMacBOINC.sh [-dev] [-noclean] [-all] [-lib] [-client] [-help]
\f0\fs24 \
\
The options for BuildMacBOINC.sh are:\
	-dev		build the development (debug) version (native architecture only). \
			default is deployment (release) version (universal binaries: ppc, i386 and x86_64).\
\
	-noclean	don't do a "clean" of each target before building.\
			default is to clean all first.\
\
  The following arguments determine which targets to build\
	-all		build all targets (i.e. target "Build_All" -- this is the default)\
\
	-lib		build the three libraries: libboinc_api.a, libboinc_graphics_api.a, libboinc.a\
\
	-client		build two targets: boinc client and command-line utility boinc_cmd\
			(also builds libboinc.a, since boinc_cmd requires it.)\
\
 Both -lib and -client may be specified to build five targets (no BOINC Manager.)\
\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\b \cf0 Note:
\b0  You may find two XCode projects in the BOINC_dev/boinc/mac_build/ directory: \
  \'95 
\b wxMac-BOINC.xcodeproj
\b0  was needed for building older versions of the wxMac library in conjunction with the older versions of the setupForBoinc.sh or buildWxMac.sh scripts.  It is not used for BOINC 5.9.2 or later.  \
  \'95 
\b boinc.xcodeproj
\b0  builds BOINC.  It can be used either with the BuildMacBOINC.sh script or as a stand-alone project.  The 
\i Development
\i0  build configuration builds only the native architecture and is used for debugging.  The 
\i Deployment
\i0  build configuration builds a universal binary and is suitable for release builds.  If there are any other build configurations, they should not be used as they are obsolete.\
\
The standard release of BOINC version 6.10.58 and later contains a universal binary of the BOINC Client containing builds for two architectures: ppc and i386.  The Mac OS automatically chooses the appropriate architecture as follows:\
 \'95 On a PowerPC Mac, it runs the ppc executable.\
 * On an Intel Mac, it runs the i386 executable.\
\
Note: you may see the following warning when building the PowerPC executable.  You may safely ignore it:\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f1\fs26 \cf0 ld: warning: object file compiled with -mlong-branch which is no longer needed. To remove this warning, recompile without -mlong-branch
\f0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f3 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\b\fs28 \cf0 Building BOINC Manager Installer
\b0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
In order to execute BOINC Manager, you have to install it using BOINC Manager Installer. Otherwise, you will encounter an error prompting for proper installation.\
\
To build the Installer for the BOINC Manager, you must be logged in as an administrator.  If you are building BOINC version number x.y.z, type the following in Terminal, then enter your administrator password when prompted by the script:\
\
\pard\pardeftab720\ql\qnatural

\f1\fs26 \cf0 cd \{path\}/BOINC_dev/boinc/\
source \{path\}/BOINC_dev/boinc/mac_installer/release_boinc.sh x y z\

\f0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 Substitute the 3 parts of the BOINC version number for x y and z in the above.  For example, to build the installer for BOINC version 5.5.4, the command would be\
\pard\pardeftab720\ql\qnatural

\f1\fs26 \cf0 source \{path\}/BOINC_dev/boinc/mac_installer/release_boinc.sh 6 11 9\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0\fs24 \cf0 This will create a directory "BOINC_Installer/New_Release_6_11_9" in the BOINC_dev directory, and the installer will be located in '
\f1\fs26 \{path\}/BOINC_dev/BOINC_Installer/New_Release_6_11_9/boinc_6.11.9_macOSX_universal
\f0\fs24 '.
\f1 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f3 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\b\fs28 \cf0 Debugging and BOINC security
\b0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural\pardirnatural
\cf0 Version 5.5.4 of BOINC Manager for the Macintosh introduced new, stricter security measures.  For details, please see the file 
\f1\fs26 boinc/mac_installer/Readme.rtf
\f0\fs24  and {\field{\*\fldinst{HYPERLINK "http://boinc.berkeley.edu/sandbox.php"}}{\fldrslt http://boinc.berkeley.edu/sandbox.php}} and {\field{\*\fldinst{HYPERLINK "http://boinc.berkeley.edu/trac/wiki/SandboxUser"}}{\fldrslt 
\f1 http://boinc.berkeley.edu/trac/wiki/SandboxUser}}\
\
\pard\tx960\tx1920\tx2880\tx3840\tx4800\tx5760\tx6720\tx7680\tx8640\tx9600\tx10560\tx11520\tx12480\tx13440\tx14400\tx15360\tx16320\tx17280\tx18240\tx19200\tx20160\tx21120\tx22080\tx23040\tx24000\tx24960\tx25920\tx26880\tx27840\tx28800\tx29760\tx30720\tx31680\tx32640\tx33600\tx34560\tx35520\tx36480\tx37440\tx38400\tx39360\tx40320\tx41280\tx42240\tx43200\tx44160\tx45120\tx46080\tx47040\tx48000\tx48960\tx49920\tx50880\tx51840\tx52800\tx53760\tx54720\tx55680\tx56640\tx57600\tx58560\tx59520\tx60480\tx61440\tx62400\tx63360\tx64320\tx65280\tx66240\tx67200\tx68160\tx69120\tx70080\tx71040\tx72000\tx72960\tx73920\tx74880\tx75840\tx76800\tx77760\tx78720\tx79680\tx80640\tx81600\tx82560\tx83520\tx84480\tx85440\tx86400\tx87360\tx88320\tx89280\tx90240\tx91200\tx92160\tx93120\tx94080\tx95040\tx96000\ql\qnatural\pardirnatural
\cf0 \CocoaLigature0 The GDB debugger can't attach to applications which are running as a different user or group so it ignores the S_ISUID and S_ISGID permission bits when launching an application.  To work around this, the BOINC 
\i \CocoaLigature1 Development
\i0 \CocoaLigature0  build does not use the special boinc_master or boinc_project users or groups, and so can be run under the debugger from XCode.  \
\
The 
\i Development
\i0  build 
\i only
\i0  of the BOINC Manager allows you to change the ownership and permission settings of the BOINC Data and executables by entering an administrator user name and password.  This also streamlines the development cycle by avoiding the need to run the installer for every change.\
\
To restore the standard ownerships and permissions, run the installer.\
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f3 \cf0 \CocoaLigature1 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural

\f0 \cf0 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\qc

\b\fs28 \cf0 Debugging into wxWidgets
\b0\fs24 \
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
\cf0 \
\pard\tx960\tx1920\tx2880\tx3840\tx4800\tx5760\tx6720\tx7680\tx8640\tx9600\tx10560\tx11520\tx12480\tx13440\tx14400\tx15360\tx16320\tx17280\tx18240\tx19200\tx20160\tx21120\tx22080\tx23040\tx24000\tx24960\tx25920\tx26880\tx27840\tx28800\tx29760\tx30720\tx31680\tx32640\tx33600\tx34560\tx35520\tx36480\tx37440\tx38400\tx39360\tx40320\tx41280\tx42240\tx43200\tx44160\tx45120\tx46080\tx47040\tx48000\tx48960\tx49920\tx50880\tx51840\tx52800\tx53760\tx54720\tx55680\tx56640\tx57600\tx58560\tx59520\tx60480\tx61440\tx62400\tx63360\tx64320\tx65280\tx66240\tx67200\tx68160\tx69120\tx70080\tx71040\tx72000\tx72960\tx73920\tx74880\tx75840\tx76800\tx77760\tx78720\tx79680\tx80640\tx81600\tx82560\tx83520\tx84480\tx85440\tx86400\tx87360\tx88320\tx89280\tx90240\tx91200\tx92160\tx93120\tx94080\tx95040\tx96000\ql\qnatural\pardirnatural
\cf0 \CocoaLigature0 The BOINC XCode project normally links the BOINC Manager with the non-debugging (Deployment) build of wxWidgets, even for the Development build configuration of the Manager.  However, there may be times when you wish to link the Development build of the Manager to the Development build of wxWidgets for debugging, as when you want to step into internal wxWidgets code or put breakpoints in wxWidgets.\
\
You can find instructions for doing this in the comments in the file 
\f1\fs26 boinc/clientgui/mac/MacGUI.pch
\f0\fs24 .\
}